Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: FS 12 inch Carbatec tablesaw
-
7th March 2021, 08:16 PM #1Member
- Join Date
- Nov 2006
- Location
- NSW
- Posts
- 90
FS 12 inch Carbatec tablesaw
Hi all.
Slightly long story, but I am simultaneously moving workshops and upgrading machinery, which has left my with a panel saw in my new shed just south of Wollongong, and an older but still cranking cabinet table saw in Blackheath, which I am now hoping to sell.
The saw I believe is a Carbatec TSC-12HK, but will have to confirm when I am next up there. In any case it is a 12 inch saw with a 3 hp motor with 15 amp plug, (which I have run problem free on a 10 amp circuit, but I'm a naughty boy......) 5,/8ths arbour and space for a dado set if needed.
I have made a range of zero clearance inserts fitted with DIY splitters to improve safety when ripping, as the saw lacks a riving knife.
Ideally I would hope to sell the saw from Backheath, where it is currently located at my in-laws place, but this may need a little flexibility to line up pickup time etc. But in the near future it will be coming down to the Illawarra, and still for sale.
I have a few spare crosscut blades that are in ok condition plus an Incra mitre jig that I could sell for the right price.
Price is negotiable, the less I have to move it the happier I will be so this will be reflected in the final price.
Lets say 900 for the saw and 100 for the Incra mitre jig, bringing the total to $1000, but again, I'm flexible particularly if it means 1 less thing to move down from Blackheath.
I'll update with photos when I'm next up there, but I'll aim to answer any questions you might have.
Thanks everyone, Steve
-
7th March 2021 08:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th March 2021, 12:18 PM #2Member
- Join Date
- Nov 2006
- Location
- NSW
- Posts
- 90
The saw has been sold to a neighbour. Thanks everyone for looking
Similar Threads
-
New Carbatec tablesaw
By Chri8.05 in forum TABLE SAWS & COMBINATIONSReplies: 2Last Post: 12th December 2021, 09:00 PM -
Attention Carbatec KS-12K tablesaw owners
By Big Shed in forum TABLE SAWS & COMBINATIONSReplies: 1Last Post: 18th September 2007, 11:24 PM