Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Glen Drake Joinery Saw
-
22nd February 2021, 04:09 AM #1
Glen Drake Joinery Saw
For sale is a Glen Drake Joinery Saw. This is designed and manufactured by Kevin Drake in the USA. Kevin designed and manufactures the Tite-mark wheel gauges.
This saw is primary designed for cutting dovetails. It is progressive-style saw, and advanced in design. The saw plate is reversible, and may be used either in the push or the pull mode.
The following is the description from their website:
Our Joinery Saw has no teeth at the front and back of the blade. This means that if you take a full stroke with the saw, the teeth will only be touching the wood when they are moving, and that's the way a power saw works. You accelerate into each cut and relax at the end of each cut.
Each blade has a finer pitch at the beginning and end with a relatively coarser pitch in the middle. This means you are ramping into and out of the coarsest part of the cut. The finer blade (18-to-14-to-18 TPI) works best in hardwoods up to 3/4" thick and will cut over 1 3/8" deep.
This blade creates a .020" kerf. Blades are replaceable and interchangeable and are available in both rip and crosscut configurations.
The handle is angled so that when your arm is level the blade is level. Holding the saw near the blade makes it more aggressive (better for softer woods), while holding it further back makes it less aggressive (better for harder woods).
Link: Glen Drake Toolworks :: Joinery Saws :: Joinery Saw
This saw has had very little use. I received it some years ago for reviewing purposes. It is time that it went to a new home.
The new price is $250 (excluding shipping) from the USA. My price is $95 (excluding postage).
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
22nd February 2021 04:09 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd February 2021, 05:57 PM #2
I'll take it
- - - Updated - - -
I'll pm re postage etc.
-
22nd February 2021, 07:40 PM #3
PM reply sent
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
Similar Threads
-
N.S.W. Glen Drake Tite Mark Mini Marking Mini Gauge
By Ruddy in forum WOODWORK - Tools & MachineryReplies: 5Last Post: 11th September 2020, 05:59 PM -
N.S.W. Glen Drake Hammers
By Ruddy in forum WOODWORK - Tools & MachineryReplies: 3Last Post: 2nd September 2020, 06:28 PM -
N.S.W. Glen Drake Tite Mark Marking Gaugr
By Ruddy in forum WOODWORK - Tools & MachineryReplies: 2Last Post: 23rd August 2020, 09:50 AM -
WEST AUST Knew Concept Fretsaw ((titanium) and Glen Drake dovetail saw
By derekcohen in forum WOODWORK - Tools & MachineryReplies: 3Last Post: 13th August 2019, 12:10 AM -
Glen-Drake Joinery Saw reviewed
By derekcohen in forum HAND TOOLS - UNPOWEREDReplies: 31Last Post: 13th April 2012, 11:15 PM