Picture(s) thanks: 0
Results 1 to 15 of 23
Thread: Hand Planes
-
10th July 2020, 07:20 PM #1Member
- Join Date
- Oct 2016
- Location
- QLD
- Posts
- 54
Hand Planes
Moving house soon, time to offload a few of my handplanes that are surplus to my needs. All in excellent working condition
Carter No. 7 Jointer.
Made in Australia. Currently my go-to jointer (sale will go towards a Veritas BUJ). Good condition, partial decal on the rear tote (if you're into that kind of thing). Frog supports full length of the cutter (unusual for a Carter plane) combined with the classic thicker Carter blades, you get the best of both worlds. Some pitting on the sole, particularly near the toe, but I found this didn't really affect the operation of the plane (tried removing on a granite slab that was machined flat with 120 grit but gave up after an hour or so). $120
IMG_20200710_163043.jpgIMG_20200710_163051.jpgIMG_20200710_163104.jpgIMG_20200710_163118.jpgIMG_20200710_163138.jpg
Stanley No 6 Fore Plane.
Made in England, Rosewood totes (mark on the front tote, could use another coat of shellac). EA Berg Cutter. Very good conditon. $100
IMG_20200710_165341.jpgIMG_20200710_165346.jpgIMG_20200710_165403.jpgIMG_20200710_165324.jpgIMG_20200710_165319.jpg
Marples No 5 1/2 Jack Plane
Good condition, some cosmetic damage to the rear tote (missing part of the horn - see pictures). Made in England. $70
IMG_20200710_165120.jpgIMG_20200710_165149.jpgIMG_20200710_165141.jpgIMG_20200710_165131.jpgIMG_20200710_165236.jpg
Record No. 09 1/2 Block Plane
Very good condition. Made in England. $60
IMG_20200710_165452.jpg IMG_20200710_165500.jpgIMG_20200710_165533.jpg
-
10th July 2020 07:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th July 2020, 11:01 PM #2
Hi Caillan, whereabouts in QLD are you?
Can you please measure the width of the blade on the Marples? The 5-1/2 was originally made with a uniquely sized 2-1/4” wide blade but sometime in the late 40’s/early 50’s it was changed to a 2-3/8” blade. One of the members of the Gin-Gin Men’s Shed has asked me to keep an eye out for a 5-1/2 for him, this might fit the bill.Nothing succeeds like a budgie without a beak.
-
10th July 2020, 11:21 PM #3GOLD MEMBER
- Join Date
- Nov 2012
- Location
- SE Melb
- Age
- 64
- Posts
- 1,277
I'm also interested in the 5 1/2; as long as its a standard size blade. I'll take it if its a standard size blade (~60 mm) and Chief doesn't want it.
-
10th July 2020, 11:33 PM #4Member
- Join Date
- Oct 2016
- Location
- QLD
- Posts
- 54
Howdy, I'm located in Brisbane, near the CBD.
Blade is 2-1/4"
IMG_20200710_222714.jpg
-
11th July 2020, 11:28 AM #5
Can you please post a photoofthe sole of the #6 stanley please. I have a friend who is looking for one of these.
I got sick of sitting around doing nothing - so I took up meditation.
-
11th July 2020, 03:46 PM #6Member
- Join Date
- Oct 2016
- Location
- QLD
- Posts
- 54
Doug, here you go:
IMG_20200711_114516.jpg
-
11th July 2020, 04:16 PM #7
-
11th July 2020, 04:24 PM #8
Ok I will take the Stanley #6 if postage to Melbourne 3029 is not excessive.
I got sick of sitting around doing nothing - so I took up meditation.
-
11th July 2020, 05:33 PM #9Member
- Join Date
- Oct 2016
- Location
- QLD
- Posts
- 54
-
11th July 2020, 05:37 PM #10
-
11th July 2020, 06:12 PM #11GOLD MEMBER
- Join Date
- Nov 2012
- Location
- SE Melb
- Age
- 64
- Posts
- 1,277
-
21st July 2020, 06:18 PM #12
#6 arrived today Caillan. Looks to be in great nick. Didn't get a chance to try it out today but looking forward to giving it a run tomorrow.
I got sick of sitting around doing nothing - so I took up meditation.
-
21st July 2020, 07:01 PM #13Intermediate Member
- Join Date
- Jan 2020
- Location
- Sydney
- Posts
- 33
I'm interested in the Block Plane, postage to Sydney please.
Thanks,
Steve
-
21st July 2020, 11:37 PM #14Member
- Join Date
- Oct 2016
- Location
- QLD
- Posts
- 54
-
22nd July 2020, 11:48 AM #15Intermediate Member
- Join Date
- Jan 2020
- Location
- Sydney
- Posts
- 33
Sounds good. I'll take it. I'll send a PM.
Steve
Similar Threads
-
Hand planes - #4 and #5
By qwertyu in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 7th October 2019, 02:48 AM -
Help on old hand planes
By ntjeep in forum HAND TOOLS - UNPOWEREDReplies: 21Last Post: 3rd January 2013, 10:11 AM -
5 1/2 hand planes
By sinjin1111 in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 27th June 2005, 02:14 PM -
Hand planes
By John Saxton in forum HAND TOOLS - UNPOWEREDReplies: 0Last Post: 29th July 2004, 10:00 PM -
Hand planes
By coastie in forum HAND TOOLS - UNPOWEREDReplies: 23Last Post: 9th February 2004, 05:56 PM