Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 19
-
17th November 2017, 06:21 PM #1
hf-50 Bench Top Router 1500W motor
Scheppach German technology and built quality router table. I've had it for a number of years, but only used it twice and just a week ago placed it in the shed.
It has a good strong 1500w 240v motor so it's single phase.
It's also variable speed starting at 8000rpm and can reach up to 24000rpm by simply turning the dial located at the front just above the on/off buttons
The spindle can be raised or lowered, the maximum height can be reached is 40mm
To change cutters there is easy access to the spindle lock.
Two collets came with the router 1/4" and 1/2", I only used 1/2" and have no clue where I've placed 1/4" collet. They are not very expensive and can bought if needed in any hardware store.
The stand was an additional accessory that I bought, I know I paid through my backside for it, but is needed unless you do want to place the router on your bench.
The fence that came with it unfortunately wasn't square so I made my own. I don't have the original fence any longer.
100mm dust chute is provided
2 spanners is provided
1 Mitre guide is provided
The tape measurements were stick on and they came off with age.
This is a very powerful machine and cut's square since I replaced the fence. I only used it twice before I went back to moulding planes. I've always been a hand tool woodworker and thought machinery would bring me equal enjoyment but it hasn't. I've kept it for so long in case I changed my mind, but I haven't and it's just taking up room.
This router table will serve its new owner loyally for the duration of his life.
Brand new without a stand is $363
I'm offering the router table with a stand for a low $250
I guess shipping would be too expensive and I don't want to lug it around either, so it's pick up only unless you organise your own shipping and get the courier to pick it up.
-
17th November 2017 06:21 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th November 2017, 08:25 AM #2
This is a very good router with the stand. Only used it twice.
-
5th December 2017, 10:00 PM #3
Price drop $240
-
28th December 2017, 02:13 PM #4
Amazing! Am I asking too much? I've only used it twice. Have you seen what they cost new?
Price drop to $230
-
28th December 2017, 02:47 PM #5GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Would you be prepared to put into a box with bearers underneath it, for fork lifting and deliver to a transport company?? I'd be prepared to pay extra for your troubles, will need to know approx size for getting transport quote.
Thanks and regards,
KrynTo grow old is mandatory, growing up is optional.
-
28th December 2017, 02:57 PM #6
I'm sorry I don't know what is a bearer. I tried googling it and bing as well and all I get is art and craft boxes. Besides I think it would cost you quite a bit, you would be better off buying a brand new one I think.
-
28th December 2017, 03:10 PM #7GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
OK thanks for that. A bearer is timber that lifts a pallet or heavy box off the ground, so that a forklift can be used to move it.
KrynTo grow old is mandatory, growing up is optional.
-
28th December 2017, 03:12 PM #8
Ok thanks, but a bearer wouldn't be needed in this case. Two men can lift it, so a pallet would be fine. I still think it would be expensive though.
-
29th December 2017, 05:34 PM #9
I'm on the Gold Coast. This is in reply to Stuart Travis as it's not showing up on the post.
-
29th December 2017, 05:34 PM #10New Member
- Join Date
- Sep 2017
- Location
- Brisbane
- Posts
- 3
Are you in Brisbane? Very interested
-
29th December 2017, 05:36 PM #11New Member
- Join Date
- Sep 2017
- Location
- Brisbane
- Posts
- 3
i can do that, consider it sold. ill send a pm soon
-
29th December 2017, 05:42 PM #12
Cool thanks Travis I'm looking forward in hearing from you.
-
29th December 2017, 07:17 PM #13New Member
- Join Date
- Sep 2017
- Location
- Brisbane
- Posts
- 3
pm sent
-
1st January 2018, 08:26 PM #14
Router is still for sale, Stuart couldn't make it down.
-
1st June 2018, 12:21 PM #15
Final Price drop to $150.
Similar Threads
-
Multipurposing a 1500w/4450rpm motor
By RedShirtGuy in forum GENERAL & SMALL MACHINERYReplies: 7Last Post: 1st June 2014, 04:41 PM -
GMC 1500w Router: Fine height adjustment
By adeben in forum ROUTING FORUMReplies: 6Last Post: 3rd August 2011, 12:16 PM -
Router plate to suit gmc 1500w
By adeben in forum ROUTING FORUMReplies: 3Last Post: 31st August 2009, 12:26 PM -
GMC 1500W Router micrometer adjustment
By Howie in forum TRITON / GMCReplies: 10Last Post: 25th August 2009, 02:24 PM -
Trade tools direct 1500w router
By Duffenator in forum ROUTING FORUMReplies: 13Last Post: 17th June 2009, 10:43 AM