Incra LS fence/wonder fence, table saw, 2HP dusty, Triton TRA001 router, etc.

**Sore_Dust** · 18th July 2018, 02:43 PM

I am not going to split this up. You can sell on what you don't need.

I am located in Carine, WA. This is for local pick up only. I can't help with any lifting.

Asking for $950 firm.

After too much back surgery and some plates and screws, I am giving away the woodwork

. I have been out of action for about three years and had a bit of water come through the roof so there is some rust on the top of the table saw and the router table has got some water in the chipboard and had some swelling so will need to be replaced (see photos - I've tried to make them as honest as possible). Everything works well and is all less than about six years old - some more recent.

I am selling my set up consisting:

Carbatech 10" Contractor's Saw on a moveable base. It still works but needs the table cleaned up - see photos. I'll give you the original fence and mitre guide that came with the table. It comes with a full Incra LS32 table saw fence and router table combo (a couple of grand worth of fence and router table? - router table comes with aluminium insert). See here: TS-LS Combo - 1
Triton TRA001 - barely used. It's mounted in the Incra router table that replaces one of the table saw wings. See here: 2400W Dual Mode Precision Plunge Router | TritonTools.com
Carbatech dust extractor 2HP - used twice. See here: https://www.carbatec.com.au/dust-con...ld-code-fm-300
All the documentation for the saw and Incra system - see photos.
Grr Ripper, feather boards, WhiteSide US made router bits for dovetails (unused) see photos.
Incra V27 Mitre gauge.
I've also got some timber for box making that you are welcome to.

Email me if you are keen, local and have the money. Thanks!

Dan

20180718_104456.jpg 20180718_103525.jpg 20180718_103351.jpg 20180718_103321.jpg 20180718_103121.jpg 20180718_103100.jpg 20180718_103109.jpg 20180718_103050.jpg 20180718_103030.jpg 20180718_104002.jpg 20180718_104451.jpg 20180718_103634.jpg

**aldav** · 18th July 2018, 06:30 PM

There's going to be a very happy WA member! Sorry to hear about your health issues, hope you can find something less taxing to capture your interest.

**astrsk** · 18th July 2018, 09:04 PM

Hi Dan, sent you a private message but not sure if it went through.. If you didn't receive it please message me back.

**doug gordon** · 19th July 2018, 03:18 AM

gday dan
yes i simpathy with about back problems but im still able to get to my shed and do a fair bit of wood work still. i'm interested in buying all of you advertised gear excluding the table saw. I'm in Brisbane but would be prepared to freight gear from you to Brisbane .I'm willing to offer you the $950.00 you are asking for your gear excluding saw bench.
Can you let me know if gear is still available and if my offer is acceptable.
Regards Doug Gordon
my contact number is 0418886643

**chappy1970** · 19th July 2018, 02:19 PM

Ripping deal for a WA local.

Hope the back gets better soon Dan

**doug gordon** · 19th July 2018, 03:24 PM

dan
doug gordon here ive been advised by woodwork forum that you are trying to contact me.
i have cleared my message box and can now accept new mail.
can you contact me know
DougGordon

**doug gordon** · 20th July 2018, 10:38 AM

Dan its Doug Gordon again dont seem to be able to get a response im still interested in all but the saw bench. i'm particularily keen on the incra sable saw device.
can you advise if all still available
Doug GORDON

**Noreik** · 20th July 2018, 10:46 AM

Hi Dan
I am intersested in all, I am not far away in Landsdale
your phone number please or you can contact me on 0417846217
Many thanks
Keiron

**Noreik** · 21st July 2018, 11:05 AM

Hi Dan
I am waiting to hear from you,I am away to work soon and will be unavailable, If you can not get me by phone
You can get me on
[email protected]
Many thanks
Keiron

**Noreik** · 21st July 2018, 09:43 PM

We are very interested and we live locally. Thenks

**Sore_Dust** · 22nd July 2018, 12:28 PM

The dust extractor, Incra fences, router table wing and router have gone.

I've still got the table saw with cast iron top (surface rust - see pics) and original fences, mitre gauge and cast iron wing that was removed for the router table. It's in WA - Carine. I'm asking $300. I can't reply until Monday.

Cheers

Dan

**Noreik** · 22nd July 2018, 01:41 PM

Hi should have called me you said were not spliting up
i would have taken the lot
cheers

**Regdop** · 22nd July 2018, 05:16 PM

Originally Posted by Noreik

Hi should have called me you said were not spliting up
i would have taken the lot
cheers

You can still get the saw for a good price!! First in best dressed I'm afraid...

**aarggh** · 22nd July 2018, 05:57 PM

Originally Posted by Noreik

Hi should have called me you said were not spliting up
i would have taken the lot
cheers

If you would have taken the lot, why didn't you BEFORE it was split up?

cheers, Ian

**Noreik** · 23rd July 2018, 11:51 AM

Ian
Whoever you are if you read the thread my number and email address was supplied I had no way of contacting the gentleman selling the goods
I was not contacted about viewing and purchase,
Thank you for your input
Keiron

Thread: Incra LS fence/wonder fence, table saw, 2HP dusty, Triton TRA001 router, etc.

Thread Tools

Search Thread

Incra LS fence/wonder fence, table saw, 2HP dusty, Triton TRA001 router, etc.

Similar Threads

Incra Wonder Fence, Festool router table, Table saw GUMTREE SA

Small Table saw as a base for incra fence and router on a extension wing.

Incra Fence for table saw/router table

OEM fence for Triton TRA001 router

Heads up....router table & incra wonder fence

Tags for this Thread

Posting Permissions

	ANZAC DAY The spirit lives on. They shall grow not old, as we that are left grow old Age shall not weary them, nor the years condemn. At the going down of the sun and in the morning, We will remember them. Lest we forget.
This day our nation unites to commemorate the sacrifice of fallen servicemen and women during times of war. And the Band Played Waltzing Matilda \| Mothers Daughters Wives \| I Was Only Nineteen \| Diggers Lament