Incra Router Lift with Router And Heaps Of Other AWESOME Router Malarkey

**Fekit** · 19th May 2022, 03:51 PM

So this is all my router stuff. Please note that this sale DOES NOT include the Incra LS positioner or long fence, that's only shown to give you an idea of my setup.

The Incra lift does what it was designed for, i.e it goes up and down and locks. It's in pretty good condition, no scratches or anything.
The Carbatec router is near new and would barely have 10 hours on it.
The Incra Wonder Fence with the Hi-Rise bizzo is also in good nick. That is mounted on a small Incra fence so that I don't have to keep dicking around with it all the time.
The Shop Stop also works as designed.
The router table, another absolutely awesome creation on my own, is on braked wheels and has a 17mm top made from HD3 which is pretty serious material. It approximately 1.05m by 1.4m and about 880mm high

I think everything else should be self explanatory, except for the right angle thingy which I made a thread about. broom came around to collect the drill press I sold to him and was absolutely frothing over it, can't really blame him to be honest.

Just Something I made As A Test

This all has a replacement value of Approximately $3000 and that only includes a nominal $200 for the table. There's about $500 worth of router bits.

Selling Price is an absolute BARGAIN at only $1750 pickup. I can deliver locally for a small additional contribution, but if you're further away it'll be heaps.

R1.jpg R3.jpg R4.jpg R5.jpg R6.jpg R8.jpg R7.jpg

**leyton01** · 20th May 2022, 03:02 PM

Don't suppose you have a spiral flush trim bit which you would be willing to sell separately?

**Fekit** · 20th May 2022, 03:24 PM

Nope.

**KahoyKutter** · 20th May 2022, 03:41 PM

If you decide to sell things separately, I'd be interested in the Incra router lift and Carbatec router depending on the asking price. Cheers.

**Fekit** · 20th May 2022, 04:26 PM

Well splitting things up makes things more expensive. For example, the router, the switch and the lift have a new purchase price of approx $1560, I'm not selling those for 50% of replacement costs and would be looking for at least $1100.

**KahoyKutter** · 20th May 2022, 05:56 PM

Thanks, but I'll pass at that price as I already have a suitable switch and Timbecon currently have a similar package for $1349 although they don't currently have any in stock. Cheers and good luck with the sale.

**Fekit** · 20th May 2022, 07:54 PM

$1349 although they don't currently have any in stock

Not exactly a reasonable comparison to be honest, I mean, if you haven't got what you're selling then it's just kinda not a comparison.

**KahoyKutter** · 20th May 2022, 08:30 PM

Originally Posted by Fekit

Not exactly a reasonable comparison to be honest, I mean, if you haven't got what you're selling then it's just kinda not a comparison.

I'm not saying your asking price is unreasonable. By my calculation, and budgeting around $120 for a similar switch, your asking price is a saving of $400. Even if the Timbecon package were in stock, your offer is attractive enough to entice most people in the market to choose your offering especially those without a router table set-up and all the usual accessories and bits already. I'm just not one of those people. I already have a router table, router lift, switch, assorted router bits, etc. and I would be paying for a lot of things that I either already have or don't necessarily need.

**CharlieZ** · 20th May 2022, 11:51 PM

The Jessem Mast-R II router lift for $595 and AUK tools router motor for $575 in stock from Gregory Machinery. I have this setup - terrific improvement.

**Fekit** · 21st May 2022, 09:37 AM

Thanks Charlie, I wasn't aware of that priced combo.

YUUUUUUUUGGGGE PRICE DROP.

$1300 pickup only.

**conarobb** · 21st May 2022, 11:08 AM

@Fekit I have been looking fir a router table for a while but am away for work for another few weeks yet. If you can hold it until mid (ish) June I will take it.

**Fekit** · 21st May 2022, 11:14 AM

If you're happy to pay for it now or drop a significant deposit, then I can hold it until then.

**conarobb** · 21st May 2022, 11:16 AM

That sounds fair. Will PM you now.

**Fekit** · 24th May 2022, 04:43 PM

This item is Sold

Thread: Incra Router Lift with Router And Heaps Of Other AWESOME Router Malarkey

Thread Tools

Search Thread

Incra Router Lift with Router And Heaps Of Other AWESOME Router Malarkey

Similar Threads

SOLD: Incra Router Lift and AUK 1800W Router

SOLD: Router Lift, Lge C/Iron Table, H/D Stand on Wheels, Triton Router + Loads Router Bits

INCRA/Jessem Mast-R-lift II vs Triton Router with built in lift

VICTORIA Carbatec heavy duty router table plus Hitachi Tr12 with router lift.

Incra, Elu router, Jessum router lift, Arch top raised panel templates

Posting Permissions