Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
10th November 2019, 02:23 PM #1
Infeed/Outfeed Gravity Roller Stands
Up for sale are gravity roller stands. There are 2 pairs of adjustable legs which adjust from approx 570mm to 870mm (add about 30~40mm for the rollers on top). The long set of rollers measure approx 1800mm and the rollers themselves are 420 wide. The short piece is 500mm long. It's leftover from the 2nd 1800mm roller and it will need to have holes drilled for the legs. The yellow 5 roller stand measures 500mm long with 400mm rollers and adjust from 670mm to about 1020mm.
I'm asking $100 for the whole kit. Pick up from Robertson 4109.
20191110_124617.jpg 20191110_124629.jpg 20191110_124651.jpg
20191110_124923.jpg
Cheers,
Mike
-
10th November 2019 02:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th November 2019, 02:51 PM #2Novice
- Join Date
- Jan 2015
- Location
- Brisbane
- Posts
- 12
Hi Mike,
I'll take this kit. I'll flick you a message to arrange pick up.
Mark
-
11th November 2019, 09:04 PM #3
-
13th November 2019, 08:34 PM #4
Officially sold and picked up earlier today.
Similar Threads
-
QUEENSLAND infeed/outfeed support tables Performax 22/44 drum sander
By mic-d in forum WOODWORK - Tools & MachineryReplies: 6Last Post: 28th July 2019, 06:09 PM -
Infeed roller on thicknesser
By Barterbuilt in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 9th January 2013, 03:14 PM -
infeed outfeed track and sleds for bandsaw
By pjt in forum SMALL TIMBER MILLINGReplies: 4Last Post: 30th March 2009, 08:49 PM -
Infeed/outfeed table for Makita 2012
By Ashes in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 5Last Post: 17th July 2008, 04:40 PM -
Roller infeed/outfeed table
By Sturdee in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 9Last Post: 15th October 2003, 09:44 PM