Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
21st December 2017, 08:04 PM #1Senior Member
- Join Date
- May 2007
- Location
- Goulburn Valley
- Posts
- 133
Japanese smoothing plane (kanna) 42mm
I bought this a year ago but haven't had the chance to spend much time in the shed, so i've decided to put it up for sale on here.
The blade has been sharpened to to 8000G on my waterstones (mirror finish) and has camelia oil to protect it from rust. It's in great condition and ready for use.
IMG_7446.jpgIMG_7447.jpg
I'm based in SE Melbourne. Cash on pick up. Asking $35 (RRP $50)
This Plane is a traditional Japanese style plane which cuts on the pull stroke. The blade and chip breaker are held in place by compression and is adjusted with a Japanese hammer or wooden mallet. The blade is made from blue paper steel laminated with soft iron. The plane's body is made of Japanese White Oak.
In general, traditional Japanese planes require maintenance to the sole. Kakuri's planes' soles are set up to work as smoothing planes and are slightly relieved behind the blade. They can be set up for jointing or heavier stock removal with some modifications to the sole. Regardless of the configuration of the sole, this plane may require tuning before first use.
Specifications:
Blade 42mm
Plane Body Length: 180mm
Plane Body 67 mm
Blade angle: 42 degree
-
21st December 2017 08:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Fixing Deformed Ashi (Legs) on a Kanna-ba (Plane Blade) Ura
By thumbsucker in forum JAPANESE HAND TOOLSReplies: 2Last Post: 7th April 2017, 06:12 PM -
42mm by 42mm balusters
By chuck1 in forum WOODTURNING - GENERALReplies: 1Last Post: 20th November 2014, 08:24 PM -
Home Made Round Chamfer Plane Using A Stanley Smoothing Plane
By mike48 in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 8th January 2013, 10:17 AM -
Smoothing/Scraping Japanese Cedar
By paulsmithx in forum HAND TOOLS - UNPOWEREDReplies: 9Last Post: 31st May 2010, 12:00 AM