Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: JET Combo Sander
-
16th April 2019, 10:11 PM #1
JET Combo Sander
Reluctant Sale
JET COMBO SANDER
In excellent condition and rarely used since new (Less than 10 hours.).
Manufactured 11/2014
230mm (9") sanding disc (Hook & Loop)
620mm (24") Sanding belt
Comes with a centre pin accessory for sanding circles
1 new 620mm x 150 240# belt
1 new 620mm x 150 320# belt
Jet Combo Sander4 (2).jpgJet Combo Sander3 (2).jpgJet Combo Sander1 (2).jpgJet Combo Sander2 (2).jpg
The machine comes with a stand to which I've only recently attached castors for ease of moving.
The Jet Combo Sander is currently retailing at Carbatec for $899.00
I'm asking only $350 for mine and it would suit a new machine buyer except the Warranty has run out of course.
PICK UP from Yarragon by arrangement or will deliver anywhere between Warragul and Morwell for a small charge to cover petrol.
PM if interested.Last edited by Shedhand; 16th April 2019 at 10:34 PM. Reason: Item sold
If you never made a mistake, you never made anything!
-
16th April 2019 10:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
16th April 2019, 10:13 PM #2Senior Member
- Join Date
- Jan 2008
- Location
- Melbourne
- Posts
- 251
i’ll take it!!
Sent from my iPhone using Tapatalk
Similar Threads
-
WANTED:N.S.W.. Wanted - Hyco/woodfast Combo belt disc sander
By bunya pine in forum WANTED & WANTED TO BUY - in AustraliaReplies: 4Last Post: 5th August 2017, 10:49 AM -
Pickups from a combo belt/disc sander
By rtyuiop in forum DUST EXTRACTIONReplies: 4Last Post: 25th January 2016, 08:16 AM -
Dust extraction from a belt/disc combo sander
By BobL in forum DUST EXTRACTIONReplies: 5Last Post: 20th July 2014, 08:14 PM -
Disc/Belt Sander combo extraction
By wobbz in forum DUST EXTRACTIONReplies: 5Last Post: 10th May 2014, 06:40 PM -
Advice on sander/dust extraction combo
By scottbr in forum GENERAL & SMALL MACHINERYReplies: 5Last Post: 24th February 2012, 09:12 AM