Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
20th July 2021, 05:32 PM #1Senior Member
- Join Date
- Aug 2013
- Location
- Mullumbimby NSW
- Posts
- 181
Jet JPT-310 HH Jointer Thicknesser
I bought this combo machine new from Gregory Machinery (Brisbane) in September 2013. It's had an easy life as I'm a pretty slow, one-project-at-a-time amateur woodworker. I switched to the third blade on the helical cutter set earlier this year, so probably just under 1/2 life left on the cutter heads. Its a 3hp, 15amp machine, weights about 220kgs. Apart from the counter on the thicknesser wheel failing some years ago (I never quite worked out how to use it anyway?) the Jet served me very well and I'm only selling it because last week I happened to come across a second-hand Hammer A3 26 just 20km away and on an impulse bought it. I'm not 100% sure that was either wise or necessary, but its done now and given what I've been making these past years I don't have a real need for a 12" machine anyway. I could not find any Jet machines in Australia on-line but the 12" Woodman at Gregory's looks identical - its $3696. I'd like $2400 for the Jet.
IMG_1029.jpgIMG_1030.jpgIMG_1031.jpgIMG_1032.jpg
-
20th July 2021 05:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th July 2021, 12:56 PM #2Senior Member
- Join Date
- Aug 2013
- Location
- Mullumbimby NSW
- Posts
- 181
Withdrawn
Similar Threads
-
Is a combo jointer/thicknesser a good jointer
By ClintO in forum GENERAL & SMALL MACHINERYReplies: 2Last Post: 11th November 2011, 02:22 PM -
Jointer Thicknesser
By NOISY ONE in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 6th April 2008, 09:45 AM -
Thicknesser or Planer Thicknesser (Jointer)
By Markw in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 5Last Post: 9th November 2006, 01:58 PM -
Thicknesser or Jointer
By jess22 in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 17Last Post: 5th April 2005, 02:53 AM -
Jointer/thicknesser
By OBG in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 14th December 2003, 04:08 PM