Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
12th January 2020, 06:42 PM #1Novice
- Join Date
- Sep 2019
- Location
- Melbourne
- Posts
- 11
Kreg Accu-Cut + Kreg Rip-Cut circular saw jigs
Kreg Rip-Cut RRP $79
Price: $30
https://www.timbecon.com.au/rip-cut
Relatively light use. Ended up upgrading to a track saw. Was great for cutting plywood sheets on the floor that were too big to run through the table saw. With care it was quite accurate and could be used for repeatable, final cuts. Was also good for roughing out sheets before finishing on the table saw.
Kreg Accu-Cut RRP: $149
Price: $60
https://www.timbecon.com.au/accu-cut...attachment-kit
Very Light use. Upgraded to Track Saw. mostly used for rough cutting plywood sheets that exceeded the dimensions of the rip cut.
I had it set up with a left-hand bladed saw (makita DS611 if you want to double check your saw vs what I used). As you setup the cut alignment by cutting through the blue plastic guide strips, this means that you will only be able to use this with the more common right-hand bladed saw. The alignment strips are on both sides to cater for different saws. Alternatively, replacement guide strips can be purchased for $16 from Timbecon / Carbatec
Once a saw is setup, it can be transferred between both guides very easily and without fuss.
Combined price if you want both: $80
Can arrange shipping for additional cost.
-
12th January 2020 06:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th January 2020, 10:49 AM #2Intermediate Member
- Join Date
- Apr 2019
- Location
- Adelaide
- Posts
- 27
Interested - how much would it be for both shipped to 5076?
-
13th January 2020, 06:32 PM #3Novice
- Join Date
- Sep 2019
- Location
- Melbourne
- Posts
- 11
Aus Post quotes $22.85 for postage with signature on delivery for the following dimensions - 80cm * 25cm * 10cm * 4kg
I'm happy to absorb the cost of packaging / boxes.
Let me know what you think. Thanks qvack.
-
13th January 2020, 06:37 PM #4
If the deal with qvack falls through, I'll take them both
Sent from my Pixel 4 XL using Tapatalk
-
13th January 2020, 07:17 PM #5Intermediate Member
- Join Date
- Apr 2019
- Location
- Adelaide
- Posts
- 27
Sure happy with that, please pm with details
-
13th January 2020, 08:11 PM #6Novice
- Join Date
- Sep 2019
- Location
- Melbourne
- Posts
- 11
Hi qvack, will send PM with details now.
camma18 - sure. If it all somehow goes pear-shaped I'll let you know
Thanks all.
-
15th January 2020, 05:14 PM #7Novice
- Join Date
- Sep 2019
- Location
- Melbourne
- Posts
- 11
Posted this afternoon. All done. Thanks guys.
Similar Threads
-
VICTORIA Veritas 4 1/2 Smoothing Plane w/ A2 Blade & Kreg R3 Jig and Kreg Right Angle Clamp
By salumguilherme in forum WOODWORK - Tools & MachineryReplies: 1Last Post: 16th November 2018, 06:54 PM -
Kreg Vs ???
By Dazm in forum ROUTING FORUMReplies: 6Last Post: 10th July 2016, 08:55 PM -
Kreg Pocket Hole Jigs / System
By ventureoverland in forum WOODWORK - GENERALReplies: 21Last Post: 31st July 2015, 12:49 PM -
Kreg R3
By Tonyz in forum HAND TOOLS - POWEREDReplies: 3Last Post: 29th August 2007, 08:44 PM