Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
28th December 2022, 01:56 PM #1SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
Mitre guide / crosscut fence for Tablesaw / panel saw
Mitre fence for panel saw or sliding table saw. Fence itself is 730mm long and can slide along to suit desired spacing from the blade. I bought this with the intention of fitting it to the sliding carriage of a multi combination machine I used to own. It was a project I never got around to. Selling for half of what I paid for it a few years ago. $50 pick up from Caloundra. Postage is not an option on this one sorry.
Sent from my iPhone using Tapatalk
-
28th December 2022 01:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd January 2023, 06:29 PM #2Member
- Join Date
- Mar 2021
- Location
- Sydney
- Posts
- 55
Hi Woodchopper, do the detents work to accurately hold the 22.5/45/90 positions?
-
2nd January 2023, 07:48 PM #3SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
Hi Royourboat, yes, there are fixed positions where a pin locks into holes to hold a certain angle. I think the accuracy of these angles would be dependant on the user mounting the mitre gauge / crosscut fence accurately (squarely) to the slider on their saw. I didn’t use this accessory, but being European made, one would assume these preset angle positions are accurate.
Sent from my iPhone using Tapatalk
-
2nd January 2023, 08:03 PM #4Member
- Join Date
- Mar 2021
- Location
- Sydney
- Posts
- 55
Hi Woodchopper, I'll take it assuming you'll wrap some cardboard around it and allow me to organise a courier to pick-up from your chosen location.
-
2nd January 2023, 10:05 PM #5SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
No problems Royourboat. I will be in contact via PM
Sent from my iPhone using Tapatalk
-
4th January 2023, 11:19 PM #6SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
Sold.
Sent from my iPhone using Tapatalk
Similar Threads
-
Hi-Lo fence vs T-glide fence (1st tablesaw purchase - Carbatec TS-C250P)
By duncada in forum TABLE SAWS & COMBINATIONSReplies: 8Last Post: 24th August 2020, 09:43 PM -
WEST AUST INCRA Mitre 3000SE Tablesaw Fence
By Geoff Sims in forum WOODWORK - Tools & MachineryReplies: 12Last Post: 13th September 2017, 06:31 PM -
Advice on Tablesaw Crosscut Accessories
By Luke Maddux in forum TABLE SAWS & COMBINATIONSReplies: 11Last Post: 19th June 2016, 09:33 AM -
crosscut sled and other jigs for my tablesaw
By jow104 in forum WOODWORK - GENERALReplies: 9Last Post: 1st April 2008, 06:40 PM -
Incra Fence &/or Mitre Guide On Triton 2000??
By Barry F in forum TRITON / GMCReplies: 4Last Post: 17th August 2006, 10:52 PM