Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
13th May 2022, 01:15 PM #1Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
Nova Viking 16" DVR Benchtop Drill Press
Well, as gear goes this is one of the best IMHO. I used to hate, with a passion, using all of the drill presses I've had because of the inaccuracy that the runout produces, sloppy slop slop from slop town.
This piece ....... I have tried and tried to measure some, any amount, of run out on this machine and there is zero. Statistically if it does have any then it is beyond the accuracy with which I can measure and that is, with sufficient redundancy, 5 one hundredths of a millimeter. It's a pleasure to use, the auto start & stop, the depth stop and reverse out .... it's all good.
The following is a link to the Carbatec site that has the specs and a couple of videos including the mortise setup.
Nova Viking 16" DVR Drill Press | Carbatec
This next link is to a video that demonstrates the drill and tapping feature.
NOVA Viking 16" DVR Benchtop Tapping Feature - YouTube
The sale also includes the following;
Set of small sanding drums
Complete array of hole saws (3 sets) from small to # huge (200mm IIRC).
Two sets of forstner bits.
Tap & Die set (IIRC 2mm to 10mm).
Set of unused Cobalt drill bits and used HSS bits.
Mortise attachment.
Set of mortise bits & chisels.
Tilting vice.
Lube oil for steel work.
Update cable.
User manual.
The small table it sits on, which is very solid, until you make something better
FFIW this machine is less than 12 months old and still has a tiny bit of warranty left, 24th of May.
The machine on it's own has a replacement cost of $1849. How much you'd pay for all of the other stuff that's there, who knows, the Cobalt bits are probably about $100 as is the tilting vice.
Asking $1600 ono, pickup Wolvi QLD.
I can deliver for a small additional cost, unless you're miles away or interstate, in which case it'll be heaps.
D1.jpgD2.jpg D3.jpg D6.jpgD5.jpg
-
13th May 2022 01:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th May 2022, 05:22 PM #2GOLD MEMBER
- Join Date
- May 2012
- Location
- Melb
- Posts
- 1,545
This drill is a life changer! Absolutely superb bit of kit!
Couldn't recommend it high enough. Bloody good bargain with all the extras, my cobalt set cost me $125 at the time!
-
13th May 2022, 08:48 PM #3Member
- Join Date
- Aug 2014
- Location
- Australia
- Posts
- 54
I'll offer $1400 pickup
-
14th May 2022, 12:29 AM #4
If only you had listed this a week earlier......
20220513_092740.jpg
-
14th May 2022, 01:14 AM #5Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
I'll offer $1400 pickup
And when you actually drop that handle, you will realise, yeah, that is a whole world of $1600 goodness, and it was worth that $200.
Just another $200 and you can let rip ........ I'll take it .......
-
14th May 2022, 04:12 AM #6Member
- Join Date
- Aug 2014
- Location
- Australia
- Posts
- 54
ok $1500 then
-
14th May 2022, 08:01 AM #7Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
Okdokey broom, your offer of $1500 is accepted, PM sent.
Sold pending payment.
-
16th May 2022, 01:17 PM #8Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
This item is now sold.
Similar Threads
-
Nova Viking Drill Press
By Bernmc in forum WOODWORK - GENERALReplies: 76Last Post: 6th December 2023, 02:53 PM -
New Nova Viking Drill Press - Initial thoughts and an old Stanley 803
By Aussiephil in forum GENERAL & SMALL MACHINERYReplies: 4Last Post: 29th November 2020, 10:35 PM -
Benchtop drill press won't start.
By fanlee in forum GENERAL & SMALL MACHINERYReplies: 8Last Post: 9th March 2020, 10:46 PM -
Choosing benchtop drill press
By CharlieZ in forum GENERAL & SMALL MACHINERYReplies: 3Last Post: 14th September 2019, 09:05 PM