Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 8 of 8
  1. #1
    Join Date
    Jul 2008
    Location
    Melbourne
    Age
    44
    Posts
    89

    Default SCM 305mm cabinet saw

    SCM (Italian, not Chinese)305mm cabinet saw with sliding table. Blade rises and falls and tilts to 45 degrees. The saw has been well looked after and is in excellent condition. I am only replacing due to an upgrade.
    Saw is very accurate and blade is accurate to within a thou.
    Motor is a 2.2kw (3hp) 3 phase motor. Could be changed to a single phase. Good quality start stop electrical gear.
    Saw has a micro adjustable fence and fully adjustable guard.
    The sliding table runs smooth and can easily be removed if needed.
    Included are 2 blades, a 72 teeth Leuco crosscut and a ripping blade. Both blades are good and reasonably sharp.
    Footprint is 2650 X 750 however the sliding table removes to make it 2m wide. Further, the additional table to the right can be removed too. Included is the out feed table if wanted.
    Note, the dust extraction ducting is not included.
    Saw is still setup so can be seen running and used.
    Saw is currently hardwired but can be supplied with a plug if needed.
    Pickup Wantirna 3152 or I can bolt it on a pallet and drop off at a freight depot for interstate transport.

    I can send more photos.

    $1400 neg.

    IMG_20191106_193134.jpgIMG_20191106_193051.jpgIMG_20191106_193328.jpgIMG_20191106_193004.jpg
    Attached Images Attached Images

  2. #2
    Join Date
    Sep 2014
    Location
    Castlemaine, VIC AUSTRALIA
    Posts
    34

    Default

    Wow, some lucky soul will do well here. So much saw for such a great price. Best of luck with the sale.

  3. #3
    Join Date
    Jul 2015
    Location
    Hunter Valley
    Age
    51
    Posts
    832

    Default

    This is one of those moments where you snap your fingers and say "Darn I wish I didn't already have a table saw".

    Good deal for anyone lucky enough to buy this.

  4. #4
    Join Date
    May 2009
    Location
    melb
    Posts
    648

    Default

    I would like to buy it but what sort of time frame are you looking to sell it?

    also, what is the cutting capacity of the slider?

    And is the rip fence ruler only in inches?

  5. #5
    Join Date
    Jul 2008
    Location
    Melbourne
    Age
    44
    Posts
    89

    Default

    Hi Qwertyu
    The slider has a travel of 1050mm.

    The ruler is only in inches, however, I don't think it would be hard to replace it with a sick on metric one that is easily available.

    I'm keen to move it but also happy to work in with you if needed. I'll pm you my number and we can talk further.
    Regards, Andrew.

  6. #6
    Join Date
    Jul 2008
    Location
    Melbourne
    Age
    44
    Posts
    89

    Default

    Neil T and Midnight My, thank you for your kind words.

  7. #7
    Join Date
    Oct 2019
    Location
    West Wyalong
    Posts
    1

    Default

    Just wondering if it's still for sale or sold thanks mate

  8. #8
    Join Date
    Jul 2008
    Location
    Melbourne
    Age
    44
    Posts
    89

    Default

    Hi leady05, someone came and looked at the saw today, it is sold pending pickup. I will let you know if the sale does not go ahead. Regards, Andrew.

Similar Threads

  1. N.S.W. Bosch GDL-12-GCM (305mm) mitre saw
    By Edward_W in forum WOODWORK - Tools & Machinery
    Replies: 3
    Last Post: 11th Aug 2019, 08:32 PM
  2. 305mm Mitre Blades
    By Brettles in forum HAND TOOLS - POWERED
    Replies: 15
    Last Post: 4th Mar 2015, 08:03 PM
  3. Does anyone own/used a Milwaukee 305mm SCMS??
    By doktor in forum WOODWORK - GENERAL
    Replies: 1
    Last Post: 3rd Jan 2012, 09:23 PM
  4. 305mm replacement blades
    By metester in forum HAND TOOLS - POWERED
    Replies: 4
    Last Post: 4th Nov 2009, 09:42 PM
  5. GMC Compound Mitre Saw 305mm
    By Backyarder in forum HAND TOOLS - POWERED
    Replies: 4
    Last Post: 18th Jun 2004, 03:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •