Needs Pictures: 0
Results 1 to 15 of 31
-
31st March 2020, 06:32 PM #1Intermediate Member
- Join Date
- Aug 2009
- Location
- Adelaide, SA
- Posts
- 38
Shed Clean Out Sale - Tablesaw with Incra TSLS & Unused Power Tools
All items are located in Panorama, Adelaide, which is about 12 minutes drive directly south of the city centre...
A few years ago I bought a table saw and an Incra jig to go with it. I had big plans to cut down sheets and make all sorts of things. As you can see from the photos I greatly underestimated just how big this set up is. When fully opened the 'T' part of the Incra jig sticks out the side, adding an extra metre of width. Long story short, not only is the saw too big to use in my small shed, it takes up so much space it has prevented me from getting anything else done too. So, it's time to sell it and move on.
Tablesaw with Incra TSLS-32 Joinery System - $2400 o.n.o
The saw is barely used, left tilting with a 12" Flai blade. The original fence is the Biessemeyer style, which was never unboxed. The Incra jig has had minimal use, mostly on the router table. It comes with the Wonderfence and is the 810mm metric version with 72" rails.
TableSaw01.jpgTableSaw02.jpgTableSaw03.jpgTableSawFence.jpg
Bosch Sliding Compound Mitre Saw - $450
Still in good condition, this is another tool that takes up way too much space in my shed. Newer SCMSs have more compact designs. If space isn't an issue for you than this model is worth considering. This is the 12" model - GCM 12 SD.
BoschSCMS.jpg
Thicknesser - Hare & Forbes T-13-S - $650
Never opened, still has packing straps on it.
This is the helical head model, and comes with a set of 10 extra inserts.
Triton Router - $350
Opened box but never plugged in or used. I bought this one to use hand held so I wouldn't have to take my other Triton out of the table, but I never ended up using it at all. I have thrown out the top piece of styrofoam packing but all of the accessories are still in the box.
TritonRouter.jpg
Makita Angle Grinder - Cordless LXT BGA452Z - $110
I can't remember why I might have bought this. I have never had to grind any angles so this is still brand new in the box. Skin only, no battery.
Makita Biscuit Jointer - Cordless LXT BPJ180Z - $220
Made in the UK. Brand new, never taken out of it's box. Skin only, no battery.
Makita Impact Driver - $110
Made in Japan. I used this once, got annoyed it didn't have a chuck and could only use hex bits, and replaced it with a second drill. It hasn't been used since. Skin only, no battery.
Castors - 8x Side mount (2 sets of 4) - $80
These are the ones from Hare & Forbes. I had these on the table saw mobile base I made. They are used and as you can see in the pic, the black wheel has turned white where it has rolled around on the concrete.
Castors.jpg
I also have some non woodworking related items for sale which I will list in the Miscellaneous section.
Thanks for looking.
-
31st March 2020 06:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st April 2020, 10:17 PM #2New Member
- Join Date
- Jul 2018
- Location
- Adelaide
- Posts
- 1
Hi Guitr, what's the model and make on the tablesaw - thanks.
-
2nd April 2020, 02:59 PM #3Intermediate Member
- Join Date
- Aug 2009
- Location
- Adelaide, SA
- Posts
- 38
The make of tablesaw is Woodman.
According to the plate on the side:
Model number: S--330001
Mfg. Date: 2011-09
1.5kW 1ph 240V
Amps: 9
Serial No.: 1109002
It has a 12" blade capacity with 5/8" arbour. Left tilting blade. 4" dust port.
It has a riving knife and a safety guard that connects to it, but I always left it off since it was slightly wider than the 3mm FLAI blade I put on the saw. If I remember correctly it was meant to be used with a standard 1/8" (3.2mm) blade.
I was planning to make my own splitters like the Microjig ones, but since I couldn't really use the saw I didn't get around to it.
The arbour is long enough to take a dado blade (but doesn't come with one).
When I originally bought this the table had a slight dip in it, so I got a new one under warranty. I still have the original one, which could be converted into an outfeed table since it already has the mitre slots milled into it.
That's about all I can remember about it off the top of my head. Hope this helps.
FLAISawBlade.jpgTablesawFront.jpgTablesawPlate.jpg
Edit: Now that I think about it, I think this model was referred to as the Woodman SB10/12 or SB12.
-
2nd April 2020, 07:15 PM #4GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
I’ll take the wheels if you can post them to 2082 NSW, thanks.
-
2nd April 2020, 09:07 PM #5
Hi mate. What model is the triton router you have for sale. And would you be able to post it to 2176 NSW and if so how much ? Cheers.
Sent from my iPhone using Tapatalk
-
3rd April 2020, 09:41 AM #6Intermediate Member
- Join Date
- Aug 2009
- Location
- Adelaide, SA
- Posts
- 38
-
28th April 2020, 09:08 PM #7Novice
- Join Date
- Jul 2011
- Location
- Adelaide
- Posts
- 24
Hi is the tablesaw still for sale and is it available to look at thanks.
-
29th April 2020, 11:36 AM #8SENIOR MEMBER
- Join Date
- Oct 2005
- Location
- North Balwyn Victoria
- Age
- 72
- Posts
- 520
Is the Triton router still for sale? If so, where are you located? Peter
-
29th April 2020, 02:17 PM #9
Hi . I'll Take this if you still have it + postage please.
Makita Biscuit Jointer - Cordless LXT BPJ180Z - $220
Made in the UK. Brand new, never taken out of it's box. Skin only, no battery.
Postage would be to 3967 Vic.
Thanks Rob
-
29th April 2020, 03:59 PM #10Intermediate Member
- Join Date
- Aug 2009
- Location
- Adelaide, SA
- Posts
- 38
The tablesaw is still available, but I have had to take the Incra fence off to save space. Also, I don't have power to the shed so I run a power cord from the house, so it would be best to come at a time when it is not raining.
Yes, it is still available. I am located in Panorama, Adelaide, 5041.
It's yours! I'll send you a PM with details.
-
29th April 2020, 05:31 PM #11SENIOR MEMBER
- Join Date
- Oct 2005
- Location
- North Balwyn Victoria
- Age
- 72
- Posts
- 520
Thanks, does the router have the above table winder? Peter
-
29th April 2020, 05:52 PM #12Intermediate Member
- Join Date
- Nov 2018
- Location
- Melbourne
- Posts
- 44
Are you willing to sell the Biessemeyer style fence on its own? If so, how much?
-
29th April 2020, 06:29 PM #13Intermediate Member
- Join Date
- Aug 2009
- Location
- Adelaide, SA
- Posts
- 38
This version of the Triton router doesn't come with the above table winder so you would need to add a Router Raizer or some other after market solution.
I know the smaller Tritons had the above table winders but I'm not sure if they ever added that feature to the TRA001.
I would rather sell the tablesaw first, and if the buyer doesn't want both fences then I would sell the other one afterwards.
-
29th April 2020, 07:53 PM #14Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
Very early TRA001 didn’t have the above table winders but later ones do.
-
29th April 2020, 09:53 PM #15SENIOR MEMBER
- Join Date
- Oct 2005
- Location
- North Balwyn Victoria
- Age
- 72
- Posts
- 520
Thanks, I have the 1400W unit & have to reach under the top already!! Good luck with the sale. Great routers.
Similar Threads
-
QUEENSLAND Incra Miter Express & Jumbo Right Angle Jig...unused
By Brko in forum WOODWORK - Tools & MachineryReplies: 3Last Post: 31st May 2019, 08:19 PM -
Heads up Timbecon Incra TSLS-32 on special
By Superbunny in forum INCRA JIGSReplies: 4Last Post: 28th August 2010, 11:52 AM -
incra tsls 32 opinions
By EMistral in forum WOODWORK - GENERALReplies: 0Last Post: 21st August 2009, 12:04 PM