Page 1 of 3 123 LastLast
Results 1 to 15 of 31
  1. #1
    Join Date
    Aug 2009
    Location
    Adelaide, SA
    Posts
    38

    Cool Shed Clean Out Sale - Tablesaw with Incra TSLS & Unused Power Tools

    All items are located in Panorama, Adelaide, which is about 12 minutes drive directly south of the city centre...

    A few years ago I bought a table saw and an Incra jig to go with it. I had big plans to cut down sheets and make all sorts of things. As you can see from the photos I greatly underestimated just how big this set up is. When fully opened the 'T' part of the Incra jig sticks out the side, adding an extra metre of width. Long story short, not only is the saw too big to use in my small shed, it takes up so much space it has prevented me from getting anything else done too. So, it's time to sell it and move on.


    Tablesaw with Incra TSLS-32 Joinery System - $2400 o.n.o
    The saw is barely used, left tilting with a 12" Flai blade. The original fence is the Biessemeyer style, which was never unboxed. The Incra jig has had minimal use, mostly on the router table. It comes with the Wonderfence and is the 810mm metric version with 72" rails.
    TableSaw01.jpgTableSaw02.jpgTableSaw03.jpgTableSawFence.jpg


    Bosch Sliding Compound Mitre Saw - $450
    Still in good condition, this is another tool that takes up way too much space in my shed. Newer SCMSs have more compact designs. If space isn't an issue for you than this model is worth considering. This is the 12" model - GCM 12 SD.
    BoschSCMS.jpg


    Thicknesser - Hare & Forbes T-13-S - $650
    Never opened, still has packing straps on it.
    This is the helical head model, and comes with a set of 10 extra inserts.


    Triton Router - $350
    Opened box but never plugged in or used. I bought this one to use hand held so I wouldn't have to take my other Triton out of the table, but I never ended up using it at all. I have thrown out the top piece of styrofoam packing but all of the accessories are still in the box.
    TritonRouter.jpg


    Makita Angle Grinder - Cordless LXT BGA452Z - $110
    I can't remember why I might have bought this. I have never had to grind any angles so this is still brand new in the box. Skin only, no battery.

    Makita Biscuit Jointer - Cordless LXT BPJ180Z - $220
    Made in the UK. Brand new, never taken out of it's box. Skin only, no battery.

    Makita Impact Driver - $110
    Made in Japan. I used this once, got annoyed it didn't have a chuck and could only use hex bits, and replaced it with a second drill. It hasn't been used since. Skin only, no battery.


    Castors - 8x Side mount (2 sets of 4) - $80
    These are the ones from Hare & Forbes. I had these on the table saw mobile base I made. They are used and as you can see in the pic, the black wheel has turned white where it has rolled around on the concrete.

    Castors.jpg

    I also have some non woodworking related items for sale which I will list in the Miscellaneous section.

    Thanks for looking.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2018
    Location
    Adelaide
    Posts
    1

    Default

    Hi Guitr, what's the model and make on the tablesaw - thanks.

  4. #3
    Join Date
    Aug 2009
    Location
    Adelaide, SA
    Posts
    38

    Default

    The make of tablesaw is Woodman.

    According to the plate on the side:
    Model number: S--330001
    Mfg. Date: 2011-09
    1.5kW 1ph 240V
    Amps: 9
    Serial No.: 1109002

    It has a 12" blade capacity with 5/8" arbour. Left tilting blade. 4" dust port.
    It has a riving knife and a safety guard that connects to it, but I always left it off since it was slightly wider than the 3mm FLAI blade I put on the saw. If I remember correctly it was meant to be used with a standard 1/8" (3.2mm) blade.
    I was planning to make my own splitters like the Microjig ones, but since I couldn't really use the saw I didn't get around to it.
    The arbour is long enough to take a dado blade (but doesn't come with one).

    When I originally bought this the table had a slight dip in it, so I got a new one under warranty. I still have the original one, which could be converted into an outfeed table since it already has the mitre slots milled into it.

    That's about all I can remember about it off the top of my head. Hope this helps.

    FLAISawBlade.jpgTablesawFront.jpgTablesawPlate.jpg

    Edit: Now that I think about it, I think this model was referred to as the Woodman SB10/12 or SB12.

  5. #4
    Join Date
    Jul 2011
    Location
    In between houses
    Posts
    1,784

    Default

    I’ll take the wheels if you can post them to 2082 NSW, thanks.

  6. #5
    Join Date
    Dec 2016
    Location
    Edensor Park NSW
    Age
    33
    Posts
    97

    Default

    Hi mate. What model is the triton router you have for sale. And would you be able to post it to 2176 NSW and if so how much ? Cheers.


    Sent from my iPhone using Tapatalk

  7. #6
    Join Date
    Aug 2009
    Location
    Adelaide, SA
    Posts
    38

    Default

    Quote Originally Posted by riverbuilder View Post
    I’ll take the wheels if you can post them to 2082 NSW, thanks.
    Postage would be $23 regular parcel post, or $56 express post.

    Quote Originally Posted by Storm2point0 View Post
    Hi mate. What model is the triton router you have for sale. And would you be able to post it to 2176 NSW and if so how much ? Cheers.
    The Trtion is the full sized TRA001. Postage would be $23 parcel post, or $56 express.

  8. #7
    Join Date
    Jul 2011
    Location
    Adelaide
    Posts
    24

    Default

    Hi is the tablesaw still for sale and is it available to look at thanks.

  9. #8
    Join Date
    Oct 2005
    Location
    North Balwyn Victoria
    Age
    72
    Posts
    520

    Default

    Is the Triton router still for sale? If so, where are you located? Peter

  10. #9
    Join Date
    May 2007
    Location
    Sth Gippsland Vic
    Posts
    4,355

    Default

    Hi . I'll Take this if you still have it + postage please.

    Makita Biscuit Jointer - Cordless LXT BPJ180Z - $220
    Made in the UK. Brand new, never taken out of it's box. Skin only, no battery.

    Postage would be to 3967 Vic.

    Thanks Rob

  11. #10
    Join Date
    Aug 2009
    Location
    Adelaide, SA
    Posts
    38

    Default

    Quote Originally Posted by Wood bee View Post
    Hi is the tablesaw still for sale and is it available to look at thanks.
    The tablesaw is still available, but I have had to take the Incra fence off to save space. Also, I don't have power to the shed so I run a power cord from the house, so it would be best to come at a time when it is not raining.

    Quote Originally Posted by Repete View Post
    Is the Triton router still for sale? If so, where are you located? Peter
    Yes, it is still available. I am located in Panorama, Adelaide, 5041.

    Quote Originally Posted by auscab View Post
    Hi . I'll Take this if you still have it + postage please.

    Makita Biscuit Jointer - Cordless LXT BPJ180Z - $220
    Made in the UK. Brand new, never taken out of it's box. Skin only, no battery.

    Postage would be to 3967 Vic.

    Thanks Rob
    It's yours! I'll send you a PM with details.

  12. #11
    Join Date
    Oct 2005
    Location
    North Balwyn Victoria
    Age
    72
    Posts
    520

    Default

    Thanks, does the router have the above table winder? Peter

  13. #12
    Join Date
    Nov 2018
    Location
    Melbourne
    Posts
    44

    Default

    Are you willing to sell the Biessemeyer style fence on its own? If so, how much?

  14. #13
    Join Date
    Aug 2009
    Location
    Adelaide, SA
    Posts
    38

    Default

    Quote Originally Posted by Repete View Post
    Thanks, does the router have the above table winder? Peter
    This version of the Triton router doesn't come with the above table winder so you would need to add a Router Raizer or some other after market solution.
    I know the smaller Tritons had the above table winders but I'm not sure if they ever added that feature to the TRA001.

    Quote Originally Posted by chrisvarghese View Post
    Are you willing to sell the Biessemeyer style fence on its own? If so, how much?
    I would rather sell the tablesaw first, and if the buyer doesn't want both fences then I would sell the other one afterwards.

  15. #14
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    Very early TRA001 didn’t have the above table winders but later ones do.

  16. #15
    Join Date
    Oct 2005
    Location
    North Balwyn Victoria
    Age
    72
    Posts
    520

    Default

    Thanks, I have the 1400W unit & have to reach under the top already!! Good luck with the sale. Great routers.

Page 1 of 3 123 LastLast

Similar Threads

  1. QUEENSLAND Incra Miter Express & Jumbo Right Angle Jig...unused
    By Brko in forum WOODWORK - Tools & Machinery
    Replies: 3
    Last Post: 31st May 2019, 08:19 PM
  2. Heads up Timbecon Incra TSLS-32 on special
    By Superbunny in forum INCRA JIGS
    Replies: 4
    Last Post: 28th August 2010, 11:52 AM
  3. incra tsls 32 opinions
    By EMistral in forum WOODWORK - GENERAL
    Replies: 0
    Last Post: 21st August 2009, 12:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •