Thread: Shed Clean Out Sale - Tablesaw with Incra TSLS & Unused Power Tools

Hi will you look at $275 for the router.

Originally Posted by guitr

All items are located in Panorama, Adelaide, which is about 12 minutes drive directly south of the city centre...

A few years ago I bought a table saw and an Incra jig to go with it. I had big plans to cut down sheets and make all sorts of things. As you can see from the photos I greatly underestimated just how big this set up is. When fully opened the 'T' part of the Incra jig sticks out the side, adding an extra metre of width. Long story short, not only is the saw too big to use in my small shed, it takes up so much space it has prevented me from getting anything else done too. So, it's time to sell it and move on.


Tablesaw with Incra TSLS-32 Joinery System - $2400 o.n.o
The saw is barely used, left tilting with a 12" Flai blade. The original fence is the Biessemeyer style, which was never unboxed. The Incra jig has had minimal use, mostly on the router table. It comes with the Wonderfence and is the 810mm metric version with 72" rails.
Attachment 470737Attachment 470738Attachment 470739Attachment 470740


Bosch Sliding Compound Mitre Saw - $450
Still in good condition, this is another tool that takes up way too much space in my shed. Newer SCMSs have more compact designs. If space isn't an issue for you than this model is worth considering. This is the 12" model - GCM 12 SD.
Attachment 470741


Thicknesser - Hare & Forbes T-13-S - $650
Never opened, still has packing straps on it.
This is the helical head model, and comes with a set of 10 extra inserts.


Triton Router - $350
Opened box but never plugged in or used. I bought this one to use hand held so I wouldn't have to take my other Triton out of the table, but I never ended up using it at all. I have thrown out the top piece of styrofoam packing but all of the accessories are still in the box.
Attachment 470742


Makita Angle Grinder - Cordless LXT BGA452Z - $110
I can't remember why I might have bought this. I have never had to grind any angles so this is still brand new in the box. Skin only, no battery.

Makita Biscuit Jointer - Cordless LXT BPJ180Z - $220
Made in the UK. Brand new, never taken out of it's box. Skin only, no battery.

Makita Impact Driver - $110
Made in Japan. I used this once, got annoyed it didn't have a chuck and could only use hex bits, and replaced it with a second drill. It hasn't been used since. Skin only, no battery.


Castors - 8x Side mount (2 sets of 4) - $80
These are the ones from Hare & Forbes. I had these on the table saw mobile base I made. They are used and as you can see in the pic, the black wheel has turned white where it has rolled around on the concrete.

Attachment 470743

I also have some non woodworking related items for sale which I will list in the Miscellaneous section.

Thanks for looking.

Originally Posted by Martinr

Hi

Is this router still for sale, is it a 1/2 inch bit collet all being well are you open to offers.
regards
martinr

Hi Martinr, sorry for the late response.
The router is still for sale. It takes 1/2 inch bits, and comes with a reducing collet so it can take 1/4 inch bits too.
I can lower the price to $300. Let me know if you are interested.

Hi!
Would you consider selling the table saw with just the biesemeyer fence? What would be your price?
Thanks!

Originally Posted by guitr

The make of tablesaw is Woodman.

According to the plate on the side:
Model number: S--330001
Mfg. Date: 2011-09
1.5kW 1ph 240V
Amps: 9
Serial No.: 1109002

It has a 12" blade capacity with 5/8" arbour. Left tilting blade. 4" dust port.
It has a riving knife and a safety guard that connects to it, but I always left it off since it was slightly wider than the 3mm FLAI blade I put on the saw. If I remember correctly it was meant to be used with a standard 1/8" (3.2mm) blade.
I was planning to make my own splitters like the Microjig ones, but since I couldn't really use the saw I didn't get around to it.
The arbour is long enough to take a dado blade (but doesn't come with one).

When I originally bought this the table had a slight dip in it, so I got a new one under warranty. I still have the original one, which could be converted into an outfeed table since it already has the mitre slots milled into it.

That's about all I can remember about it off the top of my head. Hope this helps.

Attachment 470818Attachment 470819Attachment 470820

Edit: Now that I think about it, I think this model was referred to as the Woodman SB10/12 or SB12.

Originally Posted by Pafage1

Hi!
Would you consider selling the table saw with just the biesemeyer fence? What would be your price?
Thanks!

Yes. How does $1200 sound?

Yes interested how do you want to proceed, please send me your contact details

Hi there, do you still have the thicknesser available? cheers Sean

Did you end up selling the saw?

Andy

The thicknesser is no longer available.
The table saw is still available.
The sale of the router fell through so it's still available too.

Would it be possible to come by and have a look at the saw? I'm pretty interested!

Yes. I should be available late this week, Friday or maybe Thursday.
If you PM me your email address I'll get in contact with you.

Hi Guitr;

I have an early TRA001 router; nearly 20 years old! I'm quite conscious that the speed control was always the Achilles heel and for my model parts are impossible to get hold of so I'm giving some serious consideration to having a standby ready to go... what would be your total price for it shipped up to QLD 4670?

Thanks in advance

I can send the Triton router up to QLD for $320 total.

I'll take it!

PM to follow with my delivery info

Hi -is the Triton Router still available? If so what is the model?