Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
-
29th April 2021, 10:11 PM #1New Member
- Join Date
- Apr 2021
- Location
- Leichhardt Sydney NSW
- Posts
- 7
Slab Master with custom height (up to 350mm) and all accessories
Hi,
I have a Slab Master that I purchased new approx. 3-4 years ago. It will do the usual slab work, AND has the ability to raise the head to edge machine beams (great for edge jointing)
I purchased the accessories, but they have never been fitted!
As you can see by the photos it is just working as a table.
Has only been used 10 times, just never got around to using it!
Looking for 7.5k with accessories (does NOT come with dust extractor)
Happy to unbury the machine if you want to check it out!
-
29th April 2021 10:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th May 2021, 09:00 PM #2Senior Member
- Join Date
- Aug 2013
- Location
- Mullumbimby NSW
- Posts
- 181
Hi Mark
I'm interested in your Slab Master - if its still available are you open to offers? I may also want to have a look at it before finally deciding.
Also, can you let me know whether its 240v or 3phase, and can you give me some idea of what the accessories are that you mention.
Thanks, Charlie
-
15th May 2021, 10:52 AM #3New Member
- Join Date
- Apr 2021
- Location
- Leichhardt Sydney NSW
- Posts
- 7
Hi Charlie,
I have the saw, router accessories (I think 3 attachments, around $700) in a cupboard, just never fitted.
I am open to reasonable offers, But nothing silly. (In two minds to sell)
i think they are $9.5K + accessories over 10k
I have 15amp motor 240v, but you can get 3 phase , if you need it!
I say it was used 10 times, but its probably less.
Reason for sale, I just never find the time to use it!
i also have a decent sized extractor unit with a filter, if you're interested.
You are welcome to check it out anytime, just need the notice to clear the top.
thanks,
Mark
-
16th May 2021, 01:06 AM #4Senior Member
- Join Date
- Aug 2013
- Location
- Mullumbimby NSW
- Posts
- 181
-
17th May 2021, 01:26 PM #5Senior Member
- Join Date
- Aug 2013
- Location
- Mullumbimby NSW
- Posts
- 181
Mark, you don't seem to have Private Messages or email set up.
Anyway, on thinking about the Slab Master more, I'm not sure that single phase 240v is the best option for our needs (we have 3 phase) so I'll hold off travelling down to Sydney until I've sorted that. Thanks Charlie
-
17th May 2021, 07:00 PM #6
-
17th May 2021, 07:37 PM #7New Member
- Join Date
- Apr 2021
- Location
- Leichhardt Sydney NSW
- Posts
- 7
mmmmm, he has!
-
17th May 2021, 07:53 PM #8New Member
- Join Date
- Apr 2021
- Location
- Leichhardt Sydney NSW
- Posts
- 7
Hey Charlie,
Ive done the confirmation, but it still wont update??? Even the Woodworkfourm tells me that im activated, BUT not in my profile.
The motors are easily swapped, Yass has many options! Up to you, but my machine is near new, even swapping the motor would be a cheaper option.
I msg Yass to see what a 3 phase motor would cost.
-
17th May 2021, 08:26 PM #9
-
17th May 2021, 08:27 PM #10GOLD MEMBER
- Join Date
- May 2012
- Location
- Melb
- Posts
- 1,544
If you can edit your post I'd recommend removing the contact details, a you'll very likely be hit with calls and spam otherwise.
Cheers, Ian
-
17th May 2021, 08:30 PM #11
I’ve also deleted your post with your phone and email, I’ll send them onto Charlie for you.
Cheers
DJ
ADMIN
Similar Threads
-
350mm rule
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 28th June 2020, 06:00 PM -
My new 350mm tenon saw
By IanW in forum Saws- handmadeReplies: 12Last Post: 5th December 2014, 08:14 PM -
Wood Wizz or Slab Master
By Zarguld in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 15Last Post: 26th June 2010, 08:39 PM