Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
17th May 2020, 03:59 PM #1GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
Table Saw Blades 10" and Dado 8" bits (Sawstop)
These blades won't fit my new saw, so have to be sold.
I did a considerable amount of research before buying a set of blades that covered all the work I planned to do on my Sawstop. They are all in excellent condition, never sharpened and still razor sharp. Amana Tool blades below were in a Stumpy Nubs Shootout with Sawstop and Freud.
5/8 arbour; 10" blades; Carbide. Links to Amana tools below; Approx AU$ price ex shipping in brackets (I bought direct from the States)
Collect from Newcastle NSW, or I can post at buyers' expense.
Amana tool:
40 tooth, general purpose: PR1040C Electro-Blu™ Carbide Tipped Prestige General Purpose 10 Inch Dia 40T ATB, 18 Deg, 5/8 Bore, Non-Stick Coated ($140)
amana tool 40T.jpg $100
80 Tooth fine cut: 610800C Electro-Blu™ Carbide Tipped Trim 10 Inch Dia x 80T ATB, 10 Deg, 5/8 Bore, Non-Stick Coated ($195)
amanatool 80T.jpg $150
Flat Grind Blade - this is a rip blade, but I bought it for the flat ground teeth so suitable for box-making, finger joints, rabbets, dado's etc. It cuts beautifully. Used for a couple of test cuts and then sat crying in the corner as I haven't made any boxes or finger joints, and the few dados I've made have been done with the Freud below. Advantage for a sawstop owner is you can use it with the standard brake, so no need for a $165 dado cartridge:
610240 Carbide Tipped Ripping Standard 10 Inch Dia x 24T FT, 20 Deg, 5/8 Bore ($195)
amanatool rip.jpg $150
Sawstop Freud Dado Kit:
I'd prefer to sell this as a set, but will consider separating if there's interest in the individual bits. Consists of:
- Sawstop 8" Dado Brake Cartridge ($165)
- Sawstop Dado zero clearance insert ($80)
- Freud SD608 8" Dial-a-Width dado stack (around $500 delivered, if you can get it here!)
The dial-a-width blade is brilliant, and I'm gutted I can't have it adapted for the K3. Set up the stack according the chart, make a test cut, and then adjust the width with a simple dial - 0.004 inch or 0.1mm increments, so incredibly accurate, and no mucking about with shims. It's so simple! Comes with a setup chart, booklet and DVD with tips and plans to make some jigs.
New for all of the above = $745. I'd like $550 for the lot
freud dado set.jpg. freud dado set open.jpg freud dado contents.jpg freud dado close up.jpg freud dado chart.jpg
-
17th May 2020 03:59 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th May 2020, 07:38 PM #2GOLD MEMBER
- Join Date
- Apr 2019
- Location
- NSW
- Age
- 38
- Posts
- 1,134
awfully tempted on the dado stack.
i could do $500 and pick up tomorrow? as i'm heading into newcastle
-
17th May 2020, 08:54 PM #3GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
-
18th May 2020, 01:15 PM #4Intermediate Member
- Join Date
- May 2008
- Location
- Brisbane
- Posts
- 27
Hi Bernard. I'll take the 80T fine cut and the 24T Flat Grind blade thanks. Will require postage ... I'm in no hurry so at your convenience is OK with me. I'll PM you with details so you can let me know the postage.
-
18th May 2020, 02:24 PM #5GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
-
18th May 2020, 07:22 PM #6Intermediate Member
- Join Date
- Nov 2018
- Location
- Melbourne
- Posts
- 44
Can you do $80+postage to Melbourne for the Amana 40T? I think should be $90 altogether.
-
18th May 2020, 08:16 PM #7GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
-
18th May 2020, 09:09 PM #8Intermediate Member
- Join Date
- Nov 2018
- Location
- Melbourne
- Posts
- 44
-
19th May 2020, 08:23 AM #9GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
all sold pending payment
Similar Threads
-
QUEENSLAND CMT Precision Dado Set - 200mm (8") - 5/8" bore
By KahoyKutter in forum WOODWORK - Tools & MachineryReplies: 7Last Post: 24th February 2020, 06:25 PM -
Dado Stack/Blade Size. 6" or 8" and Table Saw Power?
By metester in forum TABLE SAWS & COMBINATIONSReplies: 14Last Post: 31st July 2018, 09:26 PM -
SawStop Contractor 52" Table Saw 1.75HP
By rickymaher in forum WOODWORK - Tools & MachineryReplies: 1Last Post: 8th March 2017, 06:56 PM -
Dado side blades for 8"
By tfscott in forum TABLE SAWS & COMBINATIONSReplies: 1Last Post: 11th August 2013, 01:31 PM