Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1
    Join Date
    Nov 2018
    Location
    Newcastle
    Posts
    498

    Default Table Saw Blades 10" and Dado 8" bits (Sawstop)

    These blades won't fit my new saw, so have to be sold.

    I did a considerable amount of research before buying a set of blades that covered all the work I planned to do on my Sawstop. They are all in excellent condition, never sharpened and still razor sharp. Amana Tool blades below were in a Stumpy Nubs Shootout with Sawstop and Freud.

    5/8 arbour; 10" blades; Carbide. Links to Amana tools below; Approx AU$ price ex shipping in brackets (I bought direct from the States)

    Collect from Newcastle NSW, or I can post at buyers' expense.

    Amana tool:

    40 tooth, general purpose: PR1040C Electro-Blu™ Carbide Tipped Prestige General Purpose 10 Inch Dia 40T ATB, 18 Deg, 5/8 Bore, Non-Stick Coated ($140)

    amana tool 40T.jpg $100


    80 Tooth fine cut
    : 610800C Electro-Blu™ Carbide Tipped Trim 10 Inch Dia x 80T ATB, 10 Deg, 5/8 Bore, Non-Stick Coated ($195)

    amanatool 80T.jpg $150


    Flat Grind Blade - this is a rip blade, but I bought it for the flat ground teeth so suitable for box-making, finger joints, rabbets, dado's etc. It cuts beautifully. Used for a couple of test cuts and then sat crying in the corner as I haven't made any boxes or finger joints, and the few dados I've made have been done with the Freud below. Advantage for a sawstop owner is you can use it with the standard brake, so no need for a $165 dado cartridge:

    610240 Carbide Tipped Ripping Standard 10 Inch Dia x 24T FT, 20 Deg, 5/8 Bore ($195)

    amanatool rip.jpg $150


    Sawstop Freud Dado Kit:


    I'd prefer to sell this as a set, but will consider separating if there's interest in the individual bits. Consists of:
    - Sawstop 8" Dado Brake Cartridge ($165)
    - Sawstop Dado zero clearance insert ($80)
    - Freud SD608 8" Dial-a-Width dado stack (around $500 delivered, if you can get it here!)

    The dial-a-width blade is brilliant, and I'm gutted I can't have it adapted for the K3. Set up the stack according the chart, make a test cut, and then adjust the width with a simple dial - 0.004 inch or 0.1mm increments, so incredibly accurate, and no mucking about with shims. It's so simple! Comes with a setup chart, booklet and DVD with tips and plans to make some jigs.

    New for all of the above = $745. I'd like $550 for the lot

    freud dado set.jpg. freud dado set open.jpg freud dado contents.jpg freud dado close up.jpg freud dado chart.jpg

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2019
    Location
    NSW
    Age
    34
    Posts
    167

    Default

    awfully tempted on the dado stack.

    i could do $500 and pick up tomorrow? as i'm heading into newcastle

  4. #3
    Join Date
    Nov 2018
    Location
    Newcastle
    Posts
    498

    Default

    Quote Originally Posted by havabeer69 View Post
    awfully tempted on the dado stack.

    i could do $500 and pick up tomorrow? as i'm heading into newcastle
    Done. I'll have to leave it with the missus as I'll be in the Rurals. Flick an email to bernard at mcclement dot co dot uk

  5. #4
    Join Date
    May 2008
    Location
    Brisbane
    Posts
    3

    Default

    Hi Bernard. I'll take the 80T fine cut and the 24T Flat Grind blade thanks. Will require postage ... I'm in no hurry so at your convenience is OK with me. I'll PM you with details so you can let me know the postage.

  6. #5
    Join Date
    Nov 2018
    Location
    Newcastle
    Posts
    498

    Default

    Quote Originally Posted by Jestofunkster View Post
    Hi Bernard. I'll take the 80T fine cut and the 24T Flat Grind blade thanks. Will require postage ... I'm in no hurry so at your convenience is OK with me. I'll PM you with details so you can let me know the postage.
    Sure thing. Will let you know postage shortly.
    ===============================

    Just the 40T general purpose blade left now.

  7. #6
    Join Date
    Nov 2018
    Location
    Melbourne
    Posts
    25

    Default

    Can you do $80+postage to Melbourne for the Amana 40T? I think should be $90 altogether.

  8. #7
    Join Date
    Nov 2018
    Location
    Newcastle
    Posts
    498

    Default

    Quote Originally Posted by chrisvarghese View Post
    Can you do $80+postage to Melbourne for the Amana 40T? I think should be $90 altogether.
    How about $100 inc post?

  9. #8
    Join Date
    Nov 2018
    Location
    Melbourne
    Posts
    25

    Default

    Quote Originally Posted by Bernmc View Post
    How about $100 inc post?

    Sure, let's do it.

  10. #9
    Join Date
    Nov 2018
    Location
    Newcastle
    Posts
    498

    Default

    all sold pending payment

Similar Threads

  1. QUEENSLAND CMT Precision Dado Set - 200mm (8") - 5/8" bore
    By KahoyKutter in forum WOODWORK - Tools & Machinery
    Replies: 7
    Last Post: 24th Feb 2020, 06:25 PM
  2. Dado Stack/Blade Size. 6" or 8" and Table Saw Power?
    By metester in forum TABLE SAWS & COMBINATIONS
    Replies: 14
    Last Post: 31st Jul 2018, 09:26 PM
  3. SawStop Contractor 52" Table Saw 1.75HP
    By rickymaher in forum WOODWORK - Tools & Machinery
    Replies: 1
    Last Post: 8th Mar 2017, 06:56 PM
  4. Dado side blades for 8"
    By tfscott in forum TABLE SAWS & COMBINATIONS
    Replies: 1
    Last Post: 11th Aug 2013, 01:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •