Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Toolmac Table Saw
-
3rd June 2020, 10:13 PM #1
Toolmac Table Saw
For Regretful sale
One Toolex 10” 254mm table saw and Makita 3612 router 1/2' which comes with a 1/4"collett installed. The saw has been upgraded with a Biesemeyer style fence which works with the router table as well.
The saw comes with an assortment of blades including a dado stack up to 1” wide with shims. I have two 60 tooth blades and I also have several rip type blades which I use on suspect (reclaimed) wood. Some feather boards and a variety of push sticks. I also have a bunch of MDF blank inserts for zero tolerance work. Very useful for working with the dado stack.
The saw originally came with a sliding table but as you can see I have taken this off and installed a router table.
I have kept the slide table so that it can be reinstalled if required.
I have added a “Big Gulp” dust collector, which works really well.
I have rigged up a safety switch (Triton) so that I can have both the dusty & saw come on at the same time.
I would like to sell the unit as a whole so am asking a reasonable $650.00 for the whole lot. There is also a Hafco Woodmaster 1 HP dusty I can throw in for an extra $100.00.
TT
20200331_162717.jpg 20200331_162729.jpg 20200331_165406.jpg 20200331_162800.jpg 20200331_162812.jpg 20200331_162829.jpg 20200331_165414.jpg 20200331_165507.jpg20200331_165526.jpg 20200331_165621.jpg 20200331_165707.jpg 20200331_165728.jpg 20200331_165733.jpg 20200331_165822.jpg 20200331_165918.jpg 20200331_162239.jpg 20170413_123038.jpgLearning to make big bits of wood smaller......
-
3rd June 2020 10:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th June 2020, 10:51 PM #2New Member
- Join Date
- May 2020
- Location
- Myocum
- Posts
- 3
Hey Twisted Tenon, where are you located please?
-
7th June 2020, 08:55 AM #3New Member
- Join Date
- Aug 2019
- Location
- Southern Highlands NSW
- Posts
- 4
Hey mate, I'm very interested if this is still available, I'll send you a message
-
7th June 2020, 10:27 AM #4New Member
- Join Date
- Aug 2019
- Location
- Southern Highlands NSW
- Posts
- 4
ok I think I just PM'ed you TT but let me know if you dont get it.
-
7th June 2020, 09:31 PM #5
-
7th June 2020, 09:32 PM #6
-
8th June 2020, 07:19 PM #7New Member
- Join Date
- Aug 2019
- Location
- Southern Highlands NSW
- Posts
- 4
Just to make it official as per the rules,
Consider it sold, pending pickup on the weekend
-
14th June 2020, 02:09 PM #8
Gone to a good home today.
Thanks Wodineye
TTLearning to make big bits of wood smaller......
Similar Threads
-
N.S.W. Toolmac Lathe
By nicaboo799 in forum WOODWORK - Tools & MachineryReplies: 1Last Post: 16th November 2019, 04:53 AM -
Toolmac 14" Bandsaw
By Hors in forum BANDSAWSReplies: 2Last Post: 26th March 2018, 05:46 PM -
Toolmac 14" bandsaw
By Warrangarree in forum BANDSAWSReplies: 7Last Post: 22nd August 2013, 03:39 PM -
Toolmac Woodlathe
By woodhenge in forum WOODTURNING - GENERALReplies: 8Last Post: 16th June 2009, 09:08 AM