Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
-
28th January 2021, 11:34 AM #1Senior Member
- Join Date
- Feb 2017
- Location
- Camperdown
- Age
- 58
- Posts
- 224
Triton 2000 plus a whole lot more
Bought this for a project some years ago, added bits and pieces along the way and have never used it, I have just spent the whole time kicking my toes on it. So today I almost broke a toe again and came to the realisation that it is just in the way and I am sick of sore toes. Or I am a slow learner.......
Anyway - pictures form the description, there is a 1750W GMC circular saw stuck in this, and I have everything shown, I will admit some pieces I don't know what they do.
But I want this setup gone to someone who can use it. I live the middle of Western Victoria but work in the Melbourne CBD and can meet on the outskirts of Geelong as I drive through or the items can be picked up in the Melbourne CBD where I park my car.
No idea of value but can someone make a reasonable offer to set things off.
20210128_110335[1].jpg20210128_110341[1].jpg20210128_110345[1].jpg20210128_110516[1].jpg20210128_110524[1].jpg20210128_110529[1].jpg20210128_110934[1].jpg20210128_111122[1].jpg
Ok someone posted and ill throw a figure in. But hard when not sure of value. 500???? Too much? Too little?
-
28th January 2021 11:34 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th January 2021, 12:10 PM #2
Marketplace rules:
"Price must be included, add ONO (Or Nearest Offer) if price is negotiable. If you are not not sure of a price, add a ballpark figure"
-
28th January 2021, 01:18 PM #3Senior Member
- Join Date
- Feb 2017
- Location
- Camperdown
- Age
- 58
- Posts
- 224
Sorry administrator.
If it helps, im looking for a small thicknesser and a table saw.
-
28th January 2021, 01:44 PM #4
Fair price
I’m not in the market for this but I had one many years ago as a beginner’s kit.
I think a fair price for your lot would be around $250.
Hope this helps.
cheers
ShedhandIf you never made a mistake, you never made anything!
-
28th January 2021, 03:52 PM #5
-
28th January 2021, 04:16 PM #6Senior Member
- Join Date
- Feb 2017
- Location
- Camperdown
- Age
- 58
- Posts
- 224
Surprising but if that's what its worth ah well. Cheers. Anyone want to buy or swap?
-
28th January 2021, 08:10 PM #7Senior Member
- Join Date
- Jul 2010
- Location
- Brunswick VIC
- Age
- 42
- Posts
- 456
You might want to try Facebook marketplace for this one. I sold a similar set for about $350, about 6 months ago. I was quite happy with the price, but had 10+ enquiries within a few hours, and it was sold and picked up the next day. I probably could have sold it for a bit more.
It's the right audience - folks who want to dabble, and start with something simple. Many of the folks on this forum will have owned these at some stage, and most have gone on to upgrade to more 'serious' machines over time.
Happy selling!
-
28th January 2021, 08:44 PM #8I got sick of sitting around doing nothing - so I took up meditation.
-
29th January 2021, 03:45 AM #9Senior Member
- Join Date
- Mar 2011
- Location
- Melbourne
- Posts
- 150
If you are willing to pat out some bits i’d be keen on the saw height winder and the overhead router mount, but i agree with others, facebook marketplace, you may even get 600
-
29th January 2021, 11:12 AM #10Senior Member
- Join Date
- Feb 2017
- Location
- Camperdown
- Age
- 58
- Posts
- 224
Cheers gents, hoped to get it sold here but will try marketplace. I totally understand the well intentioned posts.
-
9th February 2021, 09:45 PM #11GOLD MEMBER
- Join Date
- Nov 2009
- Location
- Canberra
- Posts
- 1,301
What you have there is a 2000 workcentre, plus a router table top. But in the middle of the workcentre in photo 8 is a fence from a router table RTA300, which is not shown anywhere.
Plus the pieces in plastic bags do not appear to be Triton pieces.
Hope that is of use to you.
-
10th February 2021, 11:04 PM #12Member
- Join Date
- Sep 2012
- Location
- Canberra
- Posts
- 74
Center 2000 is lacking protractor. There is no fence for router top 2000 but there are fence and protractor for RTA300. I'd unbundle them and offer separately.
-
11th February 2021, 12:58 AM #13Senior Member
- Join Date
- Feb 2017
- Location
- Camperdown
- Age
- 58
- Posts
- 224
All sold gents.
Similar Threads
-
How to fit Triton series 2000 router jigsaw table to Triton series 2000 (WCA201) work
By clydeugene in forum TRITON / GMCReplies: 3Last Post: 10th October 2017, 05:12 PM -
Need help fitting Triton work Centre 2000 and Triton Router Table 2000 to The Paulk
By barrysumpter in forum TRITON / GMCReplies: 0Last Post: 23rd April 2016, 09:34 AM