Thread: UJK Technology Parf Mk II Guide System + box

Can you afford to miss out on this brilliant workbench top jig?

UJK Technology Parf Mk II Guide System

parf guide stylised.jpg

I do my MFT tops on the CNC now, so the Parf Guide is no longer needed. This is the Mark II (current) version, which improved on several shortcomings of the first version.

Included in the sale:

1. UJK Technology Parf Mk II Guide System - From the UK, it is $375 new - UJK Parf Mk II Guide System | Axminster Tools International / or about $50 more from the locals$ - UJK Technology Parf Guide System Mk2 | Carbatec
2. UJK Parf 3mm Aluminium Revision Dogs (3) - $28 new rom the UK, not available locally - UJK Parf Aluminium Revision Dogs (3) | Axminster Tools International
   
3. Custom Fine Furnishing at it's best finger jointed box with Kaizen foam insert.

So new this would cost you $403 from the UK, or $429 from Carbatec without the revision dogs

The Revision dogs allow you to add/extend an existing MFT hole top with the same accuracy of the original Parf guide II
Includes a dust collector attachment that I 3D-printed (works very well) as the attachment supplied with current sets didn't exist when I bought mine.
The box is a simple finger-jointed ply box, and the foam insert isn't perfect - it was my first attempt at machining foam. But it does the job.

Set is in excellent condition. Cutter remains razor sharp, and I've always oiled the guides and used the dust collector when making my tops. I planned to have it for life (until the CNC), so treated it as such.

Note that only the items listed above are included. I would recommend that you get the UJK PARF SYSTEM REAMER FOR 20MM HOLES - UJK Parf System Reamer for 20mm Holes | Axminster Tools International at some point as it's extremely useful for cleaning out holes that become tight with moisture shifts or worktop finishes dribbling down. The other useful part is the UJK CHAMFER TOOL (Uk price $49 - UJK Chamfer Tool | Axminster Tools International / local price $64 https://www.carbatec.com.au/axminste...3&SearchPos=12), but a hand-held router and a small roundover bit works just as well)

I'd prefer collection and a contactless trade from Newcastle NSW. Post can be arranged, but it's longer than the Aus post cutoff, so will need a courier - you'd have to be patient as I don't get a lot of time off during working hours to arrange.

It seems taht around 2/3rds new is a reasonable price for good 2nd hand gear, so based on the UK price, so $267 collected. Post at cost

parf box complete.jpg parf box inside.jpg parf box 3qtr view.jpg

More pics available if you need them.