Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Veritas 5-1/4 bench plane
-
25th November 2021, 04:40 PM #1
Veritas 5-1/4 bench plane
Veritas 5-1/4 bench plane known as a Junior Jack .This has merely been long term stored comes with A2 blade as the price will suggest at $400 which is inclusive of postage within Oz shores elsewhere by discussion.
NOTES on this plane here.
Also called a junior jack, the traditional #5 1/4 was 12" long, in between a #4 smooth plane at 10" and a #5 jack at 14". Our #5 1/4W differs from the original in many ways – mainly, ours has a wider blade and the mouth is 4 3/8" behind the nose, unlike the original at 3 1/2". For better accuracy, an extra-long sole in front of the blade makes it easier to keep the sole flush to the wood when starting a cut. Combined, the mouth location and sensitive feed adjustment let the #5 1/4W serve as a jointer for most cabinet work.
Like all our Veritas bench planes, the #5 1/4W bench plane incorporates a frog that extends all the way to the sole. This unique design provides complete blade support, reducing chatter and allows quick mouth adjustment. It can be closed to a narrow slit for fine shavings and minimum tear-out, or opened for heavier cuts, all without removing the lever cap or other parts; just loosen two screws and set the opening with the thumb wheel.
The body is fully stress-relieved ductile cast iron. The surface-ground 12" × 2 1/2" sole is flat and square to the sides, with extra-large side wings for stable shooting. The hardwood front knob and rear tote provide excellent control and comfort. A combined feed and lateral adjustment mechanism make blade setting easy and accurate. The 2" wide lapped blade is a full 1/8" thick, made in your choice of A2, O1 or PM-V11 tool steel.Johnno
Everyone has a photographic memory, some just don't have film.
-
25th November 2021 04:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
26th November 2021, 01:18 PM #2
Price adjustment
Make this $380.00
Johnno
Everyone has a photographic memory, some just don't have film.
-
29th November 2021, 04:13 PM #3
$350.00 which is postage included would see it as an early chrissy present in a new home?
Johnno
Everyone has a photographic memory, some just don't have film.
-
29th November 2021, 04:17 PM #4Member
- Join Date
- Feb 2016
- Location
- Sydney
- Posts
- 90
Shame it is the A2 blade, would have been all over it if it was PMV-11
-
29th November 2021, 06:10 PM #5
I'll take it
Swifty
-
29th November 2021, 06:42 PM #6
Sale pending to Swifty PM to follow.
Johnno
Everyone has a photographic memory, some just don't have film.
-
29th November 2021, 10:39 PM #7
Sold
Sold
Johnno
Everyone has a photographic memory, some just don't have film.
Similar Threads
-
WANTED:QLD. Veritas bench dogs
By shaunlee in forum WANTED & WANTED TO BUY - in AustraliaReplies: 3Last Post: 9th February 2020, 10:55 AM -
VICTORIA Veritas Edge Plane and Luban Side Rebate Plane
By woodtryer in forum WOODWORK - Tools & MachineryReplies: 18Last Post: 7th January 2020, 03:55 PM -
Veritas 5-1/4 Bench Plane Vs Low-Angle Jack Plane
By Wolfs in forum HAND TOOLS - UNPOWEREDReplies: 10Last Post: 30th April 2008, 01:43 PM -
Veritas 5-1/4W Bench Plane
By Roberto Perez F in forum WOODWORK - GENERALReplies: 2Last Post: 16th August 2005, 01:43 PM -
Veritas #5 1/4 12" Bench Plane
By Rocker in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 2nd October 2003, 09:11 PM