Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Veritas Mortice Chisels
-
25th July 2022, 01:09 AM #1
Veritas Mortice Chisels
I have four essentially unused Veritas mortice chisels for sale. These are excess to my own collection, and I need to thin my herd. As many know, I have been testing tools for Veritas for many years. The chisels here were pre-production items for road testing. This involved testing steel (A2 vs PM-V11), and handle diameter. I have no idea what the steel is here - too far back in time now - but I will state that my report to Lee Valley was that I ran out of wood before either steel type dulled. These are truly awesome mortice chisels.
These are superior mortice chisels. The blades are beautifully made, with sharp edges (to clean up the mortice walls) and very fine trapezoid profile. I sold my collection of vintage English oval bolstered mortice chisels as well as the Ray Iles version I owned after using these.
There are 2 x 1/2", and 1 each of 1/4" and 3/8". One of the chisels does not have a hoop, but so what - three of the ones I have do not either. There handles are torrified Maple, and tough as old boots. Here are my mortice chisels (not for sale!) ...
These are for sale:
The handle of the 1/2" on the far right has been shaped (slight side flattening to create a profile a little more like a oval bolstered style. This was possible as it was pretty thick to begin). Send it back if you don't like it - but I am positive that you will like it.
A better look here ...
I have been trying to come up with prices. There are none available in Canada and the world at this time. Lie-Nielsen Australia sell their mortice chisels for $273 each. The Woodworks (Sydney) sell Veritas bevel edge chisels for an average of about $230 each. Dieter-Schmid (Germany) have the Veritas mortice chisels on their website for an average of about $235 (add on shipping), but they do not have stock.
Cost: $190 each (excluding postage). Will combine postage for more than one.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
25th July 2022 01:09 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th July 2022, 07:40 PM #2Intermediate Member
- Join Date
- Sep 2015
- Location
- Mildura
- Posts
- 33
Veritas mortise chisels
Hi, Derek if you would accept $570.00 for the three chisels with the hoops including postage I will take them.
thanks
Adrian
-
25th July 2022, 09:19 PM #3
Hi Adrian
Let me find out the postage and I will let you know. What is your postcode?
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
25th July 2022, 09:57 PM #4Intermediate Member
- Join Date
- Sep 2015
- Location
- Mildura
- Posts
- 33
Veritas mortise chisels
Sorry Derek,
Should have included the postcode in the first email.
Victoria
Mildura South 3501
thanks Adrian
-
26th July 2022, 01:51 AM #5
Hi Adrian
We can make that happen
I will send you a PM.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
27th July 2022, 11:35 PM #6
The three hooped mortice chisels are sold. Remaining is the unhooped 1/2" chisel. Do not be put off by the fact there is no hoop - 3 of mine also do not, and few mortice chisels actually do have hoops. This is a truly fantastic chisel.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
Similar Threads
-
VICTORIA 4 Mortice chisels - 3 titan bevel edge chisels - 1 unused 7/8" titan firmer chisel
By mattocks in forum WOODWORK - Tools & MachineryReplies: 4Last Post: 18th August 2020, 07:02 PM -
European mortice chisels
By Ian Wells in forum HAND TOOLS - UNPOWEREDReplies: 5Last Post: 2nd March 2014, 11:47 PM -
Mortice Chisels
By Doc0055 in forum HAND TOOLS - UNPOWEREDReplies: 6Last Post: 28th November 2005, 07:58 PM -
Mortice chisels!!!
By goodwoody in forum HAND TOOLS - UNPOWEREDReplies: 20Last Post: 28th April 2004, 07:30 PM -
Mortice machine chisels
By Dennis Hill in forum HAND TOOLS - POWEREDReplies: 3Last Post: 12th March 2002, 05:47 AM