Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
12th May 2020, 07:52 AM #1
Wadkin Bursgreen BGY Disc and Belt sander.
16 inch disc and 6 inch belt sander.
3 phase 2 hp.
Weight 300kg.
The belt can be used horizontally or vertically.
The disc table adjusts in and out and for angle.
Mitre slide included.( Hyco but it fits track ok).
93 glue on discs. 36 and 60 grit.
3 Velcro discs plus one fitted.
18 new belts plus new one fitted.
Asking $1100.
Happy to demo in use.
Can delver Sydney If you can unload.
Delivery further may be possibilities later when restrictions eased.
H.Last edited by clear out; 12th May 2020 at 05:42 PM. Reason: Adding photos.
Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
12th May 2020 07:52 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th May 2020, 07:46 PM #2SENIOR MEMBER
- Join Date
- Apr 2013
- Location
- Brisbane
- Posts
- 629
Hey Clear Out, are you able to take a photo of the motor plate. Want to check it's compatibility with a VFD.
Cheers
Charl
-
13th May 2020, 09:35 AM #3SENIOR MEMBER
- Join Date
- Apr 2013
- Location
- Brisbane
- Posts
- 629
Hey Clear Out, I'll take it!
Ignore my message above - I'd look at replacing the motor with a single phase 240v motor which looks to be an easy swapout from my research.
Thanks
Charl
Similar Threads
-
Sherwood 6 x 9in Belt/Disc Sander - trimming the disc velco backing?
By Wanderanwills in forum GENERAL & SMALL MACHINERYReplies: 2Last Post: 26th March 2019, 03:25 PM -
Wadkin’s Disc Sander Fence
By woodlogic in forum ANTIQUE AND VINTAGE MACHINERYReplies: 6Last Post: 25th January 2019, 12:49 AM -
Replace drive belt on belt/disc sander.
By BlackbuttWA in forum GENERAL & SMALL MACHINERYReplies: 11Last Post: 24th October 2014, 10:41 AM -
Wadkin JT Disc & Bobbin Sander
By camoz in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 15Last Post: 12th August 2013, 09:16 PM