Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
8th May 2020, 01:39 PM #1
Wood lathe x TAFE mainly for faceplate work.
I’ve replaced this with a Wadkin RS so time to move it on.
260 centre height so will turn 520mm in dia.
About 600mm ‘tween centres.
No 2 Morse in both ends.
5 speed by outside V pulleys and link belt.
I fitted an old fashioned C & H variable speed 3 phase motor unit.
Used to put it on appropriate pulley to rough and crank up the speed with my foot.
Suggest converting to VFD if you only have 240v.
About 12 faceplates, Spur driving centre and tailstock centre.
2 banjos and a couple of disc sanding set ups.
Brake on headstock, using your had as the caliber you can stop this in seconds.
This is heavy, probably 300 kg plus.
I will have to remove the motor unit to get it out of the area it’s in.
Possible Delivery Sydney now if you can unload.
Once lockdown over and borders open Brisbane no probs and Melbourne maybe.
Asking $750.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
8th May 2020 01:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th May 2020, 05:21 PM #2
Here’s a few more pics of the drive side, motor etc and faceplates.
The thread is 1 1/4” W.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
3rd October 2020, 04:26 PM #3
Bump on this also it’s now in the way.
I can supply a 2hp single phase motor to go with it.
Or a 2hp 3 phase motor so you can fit a VFD for speed control.
Bottom pulley would need to be fitted.
Can deliver Sydney etc.
Any offers?
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
7th October 2020, 07:35 AM #4
Lathe now sold.
Lathe sold on gumtree overnight.
Bloke who bought it will be jacking up centre height to turn 600mm dia.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
Similar Threads
-
Making a Faceplate Lathe
By auscab in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 19Last Post: 21st October 2023, 07:05 PM -
Choosing a chuck for faceplate work
By rsser in forum WOODTURNING - GENERALReplies: 7Last Post: 10th November 2012, 06:42 AM -
Big lathe faceplate made.
By aametalmaster in forum METALWORK FORUMReplies: 5Last Post: 16th May 2011, 03:50 PM -
Lathe faceplate manufacture?
By Lanza_1 in forum METALWORK FORUMReplies: 4Last Post: 20th November 2009, 01:02 AM