Thread: Woodpeckers Router Fence w’ micro adjust

I'm interested in your woodpecker fence setup, but noticed the two lock down fence knobs are missing, I guess you have them? I already have the Woodpecker RF3 fence setup so honestly I'm mostly interested in the micro-adjuster, but if the price was more attractive I could be tempted to buy your setup (and then try to sell the RF3?). I'm in northern NSW and based on your info it looks like postage would be around $20-25? Thanks

Originally Posted by surfclimbfly

I have a Woodpeckers Router fence for sale. This is about 6 years old but still in first rate condition, and accurate.
The reason for the sale is I’m shouting myself a table saw and router wing which will have a fence on it. My previous setup was that I had an average bench with a flip up Makita 9 ¼ power saw on one side and a router lift on the other with 2 T-tracks between them. This fence was clearly not ideal for the saw, but brilliant for the router, however this was all I could manage with space and money.
Unit includes

• · Micro adjust
• · Super fence offset module
• · Super track flip stop
• · Optional 18” Featherboard track (Pair)
• · All instruction manuals (will be posted assembled, or pretty close to it)

Will sell for $500 plus post if needed.
Will organise freight w’ Auspost, or you can pick up from Sydney if convenient
Size and weight for postage estimate is approx; 10kgs. 950x130x250mm

Cheers

Woodpecker router fence 02.jpgWoodpecker router fence 03.jpgWoodpecker router fence 04.jpgWoodpecker router fence 05.jpgWoodpecker router fence 06.jpgWoodpecker router fence 01.jpg

Hey mate, where in Sydney are you located for pick up?

micmcg,

I'm in Randwick, Eastern suburbs. At home most of the time so can be picked up during the week if this suits.
Cheers

Hi CharlieZ, the lock down fence knobs you mentoioned are not needed in this setup as the micro adjust knobs are used instead to fix it to the T track. I probably still have them but I just don't use them.
Cheers

Thats probably fine unless you want to use the offset fence capacity on the infeed.

I would suggest that the two missing knobs (or suitable replacement) would be easy and cheap to get if required.

Originally Posted by CharlieZ

Thats probably fine unless you want to use the offset fence capacity on the infeed.

Mate, I'd have them here in my box of T-track bits n pieces