Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 16
-
9th January 2022, 05:52 PM #1New Member
- Join Date
- Apr 2012
- Location
- Werribee, Victoria
- Posts
- 7
Woodworking machines for sale - Werribee
Hi all,
I am now retired and relocating from Werribee to Qld, I am swapping my workshop for a pool
As you will see below not much happened in the workshop anyhow, I guess I am (was) a wannabee woodworker, time to move on.
So, I have a few woodworking machines for sale.........
-- All machines were purchased new
-- I am unable to deliver so pickup only pls
-- The table saw weighs 250 kg, you will need a trailer and a few mates
1. Harvey HW110LGE-30 table saw - Harvey HW110LGE-30 Table Saw – Major Woodworking Equipment
-- I purchased this saw in Nov 2018
-- It has only had occasional use, has a few rust stains on the table top surface but they are cosmetic only
-- Comes with a set of CMT Precision dado blades - used twice - Amazon.com
-- The saw is on a mobile base
-- The saw requires a 15 amp power supply
-- The saw weighs in at around 250 kg
-- Price is $2,000
2. Sherwood 13in Deluxe Thicknesser with Segmented Spiral Head - MB-1935 - https://www.timbecon.com.au/sherwood...xe-thicknesser
-- I purchased this thicknesser about 3yrs ago.... it has never been used
-- it has helical spiral cutting head
-- Price is $750
3. SOLD - Sherwood 6" standard jointer - TBJ-6-C - https://www.timbecon.com.au/sherwood...andard-jointer
-- I purchased this jointer about 3yrs ago as well.... it has never been used either
-- The jointer is on a mobile base
-- Comes with spare blades
-- Price $600
4. Kreg router table with stand KR-PRS1045 and Triton 2400w Dual Mode Precision Router #TRB001 -
-- Router - Triton 2400W Dual Mode Precision Plunge Router | Carbatec
-- Kreg table system https://www.totaltools.com.au/precis...system-prs1045
-- About 5 yrs old, has had little use, tabletop replaced 1 yr ago due to water damage
-- Router can be raised and lowered from tabletop
-- Stand is on castors
-- i have added a top mounted switch for the router
-- Comes with assorted router bits and spare router insert
-- Price $850
5. SOLD - Sherwood Compact Dust Extractor - https://www.timbecon.com.au/sherwood...dust-extractor
-- About 3 years old
-- Never used
-- price $100
6. Sherwood 400CFM Room Cleaner Air Filter - https://www.timbecon.com.au/sherwood...ner-air-filter
-- i year old, never used
-- Comes with a remote control
-- Price $200
Photos below,
Best regards,
Dennis
2022-01-09 13.50.31.jpg2022-01-09 14.02.27.jpg2022-01-09 14.03.02.jpg2022-01-09 14.03.04.jpg2022-01-09 14.02.38.jpg2022-01-09 16.59.26.jpg2022-01-09 16.59.34.jpg2022-01-09 16.59.45.jpg
2022-01-09 13.34.28.jpg2022-01-09 13.34.11.jpg2022-01-09 13.33.16.jpg2022-01-09 13.47.24.jpg2022-01-09 13.48.03.jpg2022-01-09 13.48.19.jpg2022-01-09 13.49.16.jpg
-
9th January 2022 05:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th January 2022, 11:04 PM #2SENIOR MEMBER
- Join Date
- Jul 2006
- Location
- Mooroolbark
- Posts
- 520
Hi Dennis, I'll take the Sherwood thicknesser please.
Cheers Peter
-
10th January 2022, 10:53 AM #3SENIOR MEMBER
- Join Date
- Jul 2006
- Location
- Mooroolbark
- Posts
- 520
Sorry Dennis but I just realised this is the old spiral head with the wide cutters so I will pull out.
Sorry , my mistake.
Peter
-
10th January 2022, 10:53 AM #4New Member
- Join Date
- Apr 2012
- Location
- Werribee, Victoria
- Posts
- 7
-
10th January 2022, 11:05 AM #5Novice
- Join Date
- May 2020
- Location
- Tarneit, Vic
- Posts
- 12
I’ll take the jointer and dust extractor thanks.
-
10th January 2022, 11:47 AM #6New Member
- Join Date
- Apr 2012
- Location
- Werribee, Victoria
- Posts
- 7
-
10th January 2022, 12:57 PM #7Novice
- Join Date
- May 2020
- Location
- Tarneit, Vic
- Posts
- 12
Hi Dennis,
can I pop over this afternoon?
cheers,
Tony
-
10th January 2022, 01:36 PM #8New Member
- Join Date
- Apr 2012
- Location
- Werribee, Victoria
- Posts
- 7
Jointer
Just sent you a PM
regards,
Dennis
-
10th January 2022, 02:46 PM #9Novice
- Join Date
- May 2020
- Location
- Tarneit, Vic
- Posts
- 12
Thank you Dennis, great to meet you, have fun on your new adventure, safe travels.
-
11th January 2022, 06:56 AM #10Small Chips
- Join Date
- Jun 2009
- Location
- Melbourne
- Posts
- 171
Great saw and price, especially with the dado set!
GL with sale - I'd buy it again.
Interested in the dado set if for some reason the package doesn't get grabbed.
-
11th January 2022, 08:39 AM #11Intermediate Member
- Join Date
- Dec 2021
- Location
- Melbourne
- Age
- 52
- Posts
- 45
Hi there, i'd like the router table. I'll message to coordinate a time
thanks
-
11th January 2022, 01:32 PM #12New Member
- Join Date
- Feb 2017
- Location
- Geelong, Victoria
- Posts
- 1
Hi Dennis,
I will take the tablesaw package.
Please PM me to make arrangements.
Cheers,
Grant
-
11th January 2022, 06:12 PM #13Intermediate Member
- Join Date
- Dec 2021
- Location
- Melbourne
- Age
- 52
- Posts
- 45
Would you accept 1000 if I take the air cleaner and the router table?
-
11th January 2022, 07:29 PM #14New Member
- Join Date
- Apr 2012
- Location
- Werribee, Victoria
- Posts
- 7
Update
Hi all, I couldn't edit the original post, status has Been updated
I am now retired and relocating from Werribee to Qld, I am swapping my workshop for a pool
As you will see below not much happened in the workshop anyhow, I guess I am (was) a wannabee woodworker, time to move on.
So, I have a few woodworking machines for sale.........
-- All machines were purchased new
-- I am unable to deliver so pickup only pls
-- The table saw weighs 250 kg, you will need a trailer and a few mates
1. PENDING SALE - Harvey HW110LGE-30 table saw - Harvey HW110LGE-30 Table Saw – Major Woodworking Equipment
-- I purchased this saw in Nov 2018
-- It has only had occasional use, has a few rust stains on the table top surface but they are cosmetic only
-- Comes with a set of CMT Precision dado blades - used twice - Amazon.com
-- The saw is on a mobile base
-- The saw requires a 15 amp power supply
-- The saw weighs in at around 250 kg
-- Price is $2,000
2. Sherwood 13in Deluxe Thicknesser with Segmented Spiral Head - MB-1935 - https://www.timbecon.com.au/sherwood...xe-thicknesser
-- I purchased this thicknesser about 3yrs ago.... it has never been used
-- it has helical spiral cutting head
-- Price is $750
3. SOLD - Sherwood 6" standard jointer - TBJ-6-C - https://www.timbecon.com.au/sherwood...andard-jointer
-- I purchased this jointer about 3yrs ago as well.... it has never been used either
-- The jointer is on a mobile base
-- Comes with spare blades
-- Price $600
4. PENDING SALE - Kreg router table with stand KR-PRS1045 and Triton 2400w Dual Mode Precision Router #TRB001 -
-- Router - Triton 2400W Dual Mode Precision Plunge Router | Carbatec
-- Kreg table system https://www.totaltools.com.au/precis...system-prs1045
-- About 5 yrs old, has had little use, tabletop replaced 1 yr ago due to water damage
-- Router can be raised and lowered from tabletop
-- Stand is on castors
-- i have added a top mounted switch for the router
-- Comes with assorted router bits and spare router insert
-- Price $850
5. SOLD - Sherwood Compact Dust Extractor - https://www.timbecon.com.au/sherwood...dust-extractor
-- About 3 years old
-- Never used
-- price $100
6. Sherwood 400CFM Room Cleaner Air Filter - https://www.timbecon.com.au/sherwood...ner-air-filter
-- i year old, never used
-- Comes with a remote control
-- Price $200
Photos below,
Best regards,
Dennis
-
12th January 2022, 09:01 AM #15New Member
- Join Date
- Apr 2012
- Location
- Werribee, Victoria
- Posts
- 7
Hi Pete99,
Done, both for a grand
Similar Threads
-
KIAMA Woodworking exhibition, woodworking demonstrations, and tool and timber sale
By Greg Ward in forum WOODIES EVENTSReplies: 5Last Post: 10th March 2013, 09:55 AM -
Woodworking on Metal Machines
By Paul39 in forum WOODTURNING - GENERALReplies: 1Last Post: 7th February 2012, 03:07 PM -
Old Woodworking Machines.com
By David L in forum Links to: WEB SITESReplies: 2Last Post: 22nd February 2007, 10:12 AM -
General woodworking machines
By river rat in forum WOODWORK - GENERALReplies: 6Last Post: 20th September 2006, 05:32 PM -
Old Woodworking Machines
By NewLou in forum Links to: WEB SITESReplies: 0Last Post: 9th July 2005, 08:08 PM