Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: 6 sheets of 16mm MDF - Free
-
29th August 2022, 08:52 PM #1
6 sheets of 16mm MDF - Free
I'm cleaning up my warehouse storage. Fees have doubled.
I've a few sheets of 16mm MDF (not MR, just plain) for a Canberra-based forumite to grab.
FREE
Here is the clincher!
-- Its in storage at the Storage King East in Fyshwick and we can meet there
-- You'll need a trailer (obviously)
-- I can give you a hand, but do bring help
-- I've a couple of Gorilla Grippers to help carry and there are trolleys
-- They are on the very top floor, so its not... convenient. There is a lift.
-- You must not say anything about the obscenity that is my "organisation"
We can meet pretty much any time in the afternoons or the weekend. This, or next weekend or three, or week day or night is fine (its 24 hour). My mornings are filled, the only caveat.
Below is a picture just in case pictures of MDF matters
-- There could be 7 or 8 sheets there. I'm unsure. The taker must take them all....
-- I may try to foist a bunch of other sheets off onto you. 6, 9 and 12's... again, unsure what's there. These will be the takers choice, but they are included if desired
-- The other veneered boards pictured are My Preciouses and not part of the giveaway
I would STRONGLY want to give these to a forumite that will use them for a project, not flip them for profit. The Gods will be watching and hubris punished!
As per forum rules, post all responses here. We can PM details once deal is done.
mdf stash warehouse.jpg
-
29th August 2022 08:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Brisbane Laser Machine supplies - Acrylic sheets, Timber veneer sheets etc
By rissole in forum CNC MachinesReplies: 0Last Post: 3rd February 2016, 05:42 PM -
16mm hard wood rod
By Gags_17 in forum WOODWORK - GENERALReplies: 6Last Post: 14th February 2008, 08:57 PM -
300mm 16mm toolrest. Possible? Where?
By I_wanna_Shed in forum WOODTURNING - GENERALReplies: 11Last Post: 5th February 2008, 08:25 PM