Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Myrtle
-
2nd July 2020, 11:22 PM #1SENIOR MEMBER
- Join Date
- Jan 2018
- Location
- Tasmania
- Posts
- 262
Myrtle
Hi folks I have four planks of myrtle which all have varying degrees of flame figure. Hails from a closed joinery shop so it would be kiln dried a few years ago but still testing 14% moisture. D.a.r and both face sides shown in photos.
Board 1- 126x20×550
2- 124x20x695 both have light flame
3- 125x20x610 has a few birdseeds and strong figure but a few end checks on one corner.
4- 159x18x620 with moderate flame.
Weight is 6kg and asking $55.00 plus post/courier.
Cheers Wayne 20200702_114337.jpg20200702_114357.jpg20200702_114448.jpg20200702_114521.jpg
-
2nd July 2020 11:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd July 2020, 07:16 PM #2SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 575
I'll take them..
(so long as post is not exorbitant 😁
-
3rd July 2020, 08:51 PM #3SENIOR MEMBER
- Join Date
- Jan 2018
- Location
- Tasmania
- Posts
- 262
Around $20 post maybe cheaper with sendle couriers Russ.
-
4th July 2020, 06:32 PM #4SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 575
Sounds fine. Sold... (actually I suppose I should say 'bought'...
-
9th July 2020, 10:51 AM #5SENIOR MEMBER
- Join Date
- Jan 2018
- Location
- Tasmania
- Posts
- 262
A bit repetitive but should keep moderators happy, sold thanks Russell
-
12th July 2020, 12:49 PM #6SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 575
And arrived today...
Thanks Wayne
Similar Threads
-
Myrtle
By TasSculptor in forum TIMBERReplies: 3Last Post: 4th October 2015, 07:30 PM