![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 12 of 12
Thread: 4 jaw self centering chuck
-
29th July 2022, 07:34 PM #1
Senior Member
- Join Date
- Dec 2013
- Location
- Blue Mountains NSW
- Posts
- 148
4 jaw self centering chuck
FUERDA
NEW in original box never mounted.
F12-125mm. 4 Jaw self centering chuck.
$120 retail is around $200 ?
listing for a friend so will do my best to answer questions.
cheers
-
29th July 2022 07:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th July 2022, 05:49 PM #2
Senior Member
- Join Date
- Dec 2004
- Location
- Rushworth, Victoria
- Posts
- 381
Can you show a picture of parts in the last photo please?
"World's oldest kid"
-
3rd August 2022, 01:06 PM #3
Senior Member
- Join Date
- Dec 2013
- Location
- Blue Mountains NSW
- Posts
- 148
Sorry don’t understand ? There is a “ picture” of the parts in the last picture otherwise you could not see the picture ??
-
3rd August 2022, 03:01 PM #4
Senior Member
- Join Date
- Dec 2004
- Location
- Rushworth, Victoria
- Posts
- 381
In the last picture looks to be more parts just below red handles in polystyrene box?
"World's oldest kid"
-
3rd August 2022, 03:26 PM #5
Senior Member
- Join Date
- Dec 2004
- Location
- Rushworth, Victoria
- Posts
- 381
In the last picture looks to be more parts just below red handles in polystyrene box?
"World's oldest kid"
-
3rd August 2022, 04:37 PM #6
They are probably the external jaws wrapped up as the kit comes with them. There is one unwrapped at the bottom of the photo poking its nose out from under the package of bolts.
-
3rd August 2022, 05:33 PM #7
Senior Member
- Join Date
- Dec 2004
- Location
- Rushworth, Victoria
- Posts
- 381
I don’t know enough about these things except I bought a lathe with one of those chucks that tightens with the two bars. This chuck looks like the type that tightens with a key in the square hole that seems like it may be better.
So far I want to turn spindles about 1 1/2” diameter with square ends. I have a tail piece with the end fitting for holding the tail of spindle.
Treecycle - do you reckon this suit my purposes? I appreciate there are a variety of chucks.
Brett - are there 4 of those “external” pieces?"World's oldest kid"
-
3rd August 2022, 06:04 PM #8
SENIOR MEMBER
- Join Date
- Oct 2010
- Location
- NSW
- Posts
- 652
Andrew, this chuck's not what you want. This chuck is a metal lathe chuck which would need a backplate made for it to enable you to thread it onto your spindle. It can also be dangerous to use this style of chuck on a wood lathe for various reasons.
Brett, you would be better to offer this in the Metalwork Forum.
-
3rd August 2022, 06:07 PM #9
He has it advertised there too.
-
3rd August 2022, 06:34 PM #10
Senior Member
- Join Date
- Dec 2004
- Location
- Rushworth, Victoria
- Posts
- 381
Thanks Picko and Treecycle
"World's oldest kid"
-
5th August 2022, 12:18 AM #11
Senior Member
- Join Date
- Dec 2013
- Location
- Blue Mountains NSW
- Posts
- 148
Will add photos of styrene box contents but yes they are external jaws
-
22nd October 2023, 05:19 AM #12
Senior Member
- Join Date
- Dec 2013
- Location
- Blue Mountains NSW
- Posts
- 148
withdraw
OK guys how do I mark this WITHDRAWN ?
Similar Threads
-
Centering stock in 3 jaw chuck
By oohsam in forum METALWORK FORUMReplies: 26Last Post: 16th June 2014, 11:17 AM -
TOS 4 Jaw 125mm Self centering Chuck
By stevew in forum METALWORK FORUMReplies: 5Last Post: 8th September 2010, 01:37 PM -
Chuck not centering
By Sir Stinkalot in forum WOODTURNING - GENERALReplies: 5Last Post: 17th May 2003, 12:36 AM