Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
11th November 2021, 05:56 PM #1
Variac and ancient Star/Delta starter.
Variac from my bro’s stash which was stored for ten years in a shed up the coast.
I used this 40 years ago as a router speed controller but any voltage up to 240 can be dialed in.
Its not been under water but needs stripping and dust cleaned out from the feel of the dial.
The old starter is oil bath, hold it onto Star until the motor gets full revs then pull down to run on Delta.
Dunno what they’re worth just need them gone so how’s $100 for both
Make me an offer!
Don’t want to post, both are heavy.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
11th November 2021 05:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th November 2021, 09:42 AM #2Intermediate Member
- Join Date
- Apr 2005
- Location
- Sydney
- Posts
- 46
Not sure what a Star/Delta starter is so I reckon I don't need one but I could use a variac. Happy to pay you $40 for that. I can pick it up.
Cheers
Rick
-
13th November 2021, 11:24 AM #3
It’s yours.
PM with phone # sent.
HJimcracks for the rich and/or wealthy. (aka GKB '88)
Similar Threads
-
Tidying up a 3ph star-> delta conversion
By RustyArc in forum ELECTRONICSReplies: 1Last Post: 27th March 2015, 09:44 PM -
Converting 3 phase star to delta
By simonl in forum METALWORK FORUMReplies: 36Last Post: 24th October 2012, 03:32 PM -
Star/Delta motor wiring
By .RC. in forum METALWORK FORUMReplies: 33Last Post: 3rd March 2012, 11:01 PM