Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
4th February 2021, 11:04 PM #1
Draw bore pins - Tapered rods - Veritas 1/4 and 3/8
Hi all,
I'm doing my hand work and loving it.
Selling the big machines and replacing with The Little Stuff.
I'm after a couple of Veritas drawbore pins in 1/4" and 3/8".
They don't need to pristine or signed by Krenov.... anything that has been pre-loved would be great.
Why Veritas? Well, it seems that literally nobody makes these things any more and a good look around AliExpress and various metal working places* doesn't reveal anything too useful for repurposing. Buying would be easier than making!
Two of each would be nice, but one cannot be a choosing beggar
15K0103-12-drawbore-pin-for-3-8-pegs-ea-f-0001.jpg
I'm making a couple of benches and a table-top mini-bench for outside
Evan
* for drift pins, tapered insertion pins and long tapered punches
-
4th February 2021 11:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th February 2021, 11:11 PM #2Senior Member
- Join Date
- May 2020
- Location
- Melbourne
- Posts
- 118
Off the top of my head Lie Nielsen and Ray Isles make Drawbore Pins too
I got a set of Lie Nielsen ones and they are really cool
If you do not have any luck, you should just get it from Lee Valley
All the best!
-
5th February 2021, 08:26 AM #3
Pretty sure I have some, but unsure of their sizes. Will get back to you later today
Tom
-
5th February 2021, 06:30 PM #4
Found them.
They are both 1/2inch unfortunately.
One is 14 inches long and the other 7 inches
Tom
-
6th February 2021, 01:02 AM #5
Thanks.
I'm thinking I'll make some up with a grinder and drill.
I can tolerate that for a while until veritas starts manufacturing again
Similar Threads
-
Single row tapered roller bearing bore size
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 8th August 2020, 11:10 PM -
Veritas Tapered Plane Blades
By hiroller in forum HAND TOOLS - UNPOWEREDReplies: 5Last Post: 21st November 2013, 01:02 PM -
Keyway in a tapered bore
By bob ward in forum METALWORK FORUMReplies: 11Last Post: 13th September 2013, 11:06 PM -
An Aussie timber for making draw-bore pins?
By waveink in forum WOODWORK - GENERALReplies: 2Last Post: 25th November 2012, 12:26 AM