Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
12th December 2019, 09:15 PM #1Senior Member
- Join Date
- Apr 2013
- Location
- Canberra
- Posts
- 135
Woodfast outboard (LH thread) faceplate
Hi all,
As the title suggests I’m after a Faceplate to suit a Woodfast outboard mount, being a LH thread.
Cheers
Matt
-
12th December 2019 09:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th December 2019, 10:00 AM #2
-
13th December 2019, 01:01 PM #3
Also face plates can come in varying sizes so this should be noted unless you're not fussy aboutwhat if anything is available.
Johnno
Everyone has a photographic memory, some just don't have film.
-
13th December 2019, 02:06 PM #4
If you don't do any good I have a 1" x 10 LH tap. I have the RH one as well. I would have to find them though. May take a while.
I've made handwheels for the outboard spindle thread which worked ok.Those were the droids I was looking for.
https://autoblastgates.com.au
-
15th December 2019, 02:01 PM #5Senior Member
- Join Date
- Apr 2013
- Location
- Canberra
- Posts
- 135
Thank you for the replies. It’s a 30 x 3.5 and faceplate size isn’t important
-
15th December 2019, 08:09 PM #6
I knew I had three Woodfast 200mm cast iron face plates 30 x 3.5 but unfortunately two are right hand thread and only one has the left thread you require. If I had the spare as a left hander I would have sold it to you. If you need a right handed 200mm let me know. Sorry.
As an aside, I am after a hand wheel 30 x 3.5 left hand thread if anybody looking at this thread has one of those for sale or knows where I can get one please let me know.
Col.Good better best, never let it rest, until your good is better and your better best.
-
15th December 2019, 09:14 PM #7Senior Member
- Join Date
- Apr 2013
- Location
- Canberra
- Posts
- 135
-
5th February 2020, 06:04 PM #8
If you didn't have any luck finding the face plate, try here.
Home
I just got a hand wheel brake with the 30mmx3.5 LH thread from them and they have face plates. Price with postage was great too. Contact them and ask if they have LH thread as I see RH thread listed.
Col.
Lara Vic.Good better best, never let it rest, until your good is better and your better best.
Similar Threads
-
Woodfast wood lathe headstock thread identity
By 88rob88 in forum WOODTURNING - GENERALReplies: 37Last Post: 23rd March 2019, 07:24 PM -
Outboard Turning - Chuck or Faceplate - How rare are they?
By Braxtonatoraxto in forum WOODTURNING - GENERALReplies: 1Last Post: 9th September 2016, 06:21 PM -
Thread size outboard of spindle on an AL336
By denncarm in forum METALWORK FORUMReplies: 3Last Post: 26th February 2012, 02:52 AM -
Woodfast MC 908 Thread Size
By westpest in forum WOODTURNING - GENERALReplies: 6Last Post: 30th September 2007, 05:40 PM -
SuperNova2 - Faceplate Ring V's Dedicated Faceplate
By Toasty in forum WOODTURNING - GENERALReplies: 16Last Post: 14th September 2005, 04:50 PM