Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
24th May 2023, 08:49 PM #1New Member
- Join Date
- Dec 2017
- Location
- Melbourne
- Posts
- 5
Bosch GTS10J Table saw bits (not the table saw)
My Bosch GTS10J table saw got nicked recently, so I have some bits that are of no use to me. Maybe they are to you:
GTA 600 scissor stand
30mm arbor flange
25.4mm arbor flange
Throat plate insert
Zero clearance blanks
Blade guard
Blade spanner
3 HDPE runners
The 30mm arbor flange is really useful - it allows you to use blades with a 30mm bore without a reducer ring. The 25.4mm flange is the original one - I had another 30mm on the saw when it was nicked. I had plans to find someone with a metalworking lathe to remove the 30mm flange insert to turn it into a 5/8" flange. If you already have the stock 25.4mm one, you could do that to the spare 25.4mm one here.
The zero clearance blanks are cut to fit the saw in 2 dimensions and are made from HDF (from some 10mm engineered floorboards). One has had bits routed from the underside so it fits in 3 dimensions. The rest need this done. The picture has some zero clearance inserts made from plyrood - they're a bit rubbish so I'm actually throwing them out. There is also 1 MDF template for routing new blanks.
Ideally one person takes the lot, pickup. Priority will be given to that person. Please take these and enjoy your table saw.
Pickup is in Yarraville.
-
24th May 2023 08:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th May 2023, 02:21 PM #2
That's awful having such a good saw stolen.
If no one else comes to the party for your generous offer, may I please have the goods in the second photo; I'll pay postage to 2776.
I have the same saw in my shed on a similar scissor stand, only orange.
Let me know if, what and when thank you.
Cheers crowie
-
25th May 2023, 10:53 PM #3New Member
- Join Date
- Dec 2017
- Location
- Melbourne
- Posts
- 5
I'll give it a bit to run here but if no-one turns up, i'll send that stuff your way, crowie. Maybe give it a week or so.
-
1st June 2023, 12:36 PM #4New Member
- Join Date
- Dec 2017
- Location
- Melbourne
- Posts
- 5
Hey crowie.
It's been a week and no other interest for local pickup, so I'll get all the bits apart from the stand packaged up and shipped out soon. I'm a bit under the weather at the moment so not right away. When I looked last week, it seemed it would fit in one of the shipping boxes classified as "large" which I think was about $14 to ship plus a couple more bucks for the box. I'll do some measuring and confirm that soon and let you know how tight I can get the packaging.
-
1st June 2023, 02:40 PM #5
Thank you Cam.
“pm” & email sent with my details.
Cheers Peter
-
3rd July 2023, 09:50 PM #6
Thank you again Cam.
I've sent a followup “pm” & email sent checking up upon how things are going..
Cheers Peter
Similar Threads
-
Bosch Under-Table Router Base with Above-Table Hex Key RA1165
By Moza58 in forum HAND TOOLS - POWEREDReplies: 0Last Post: 30th November 2020, 07:29 PM -
Bosch GTS10J Table Saw tricks & tips suggestions
By axam in forum TABLE SAWS & COMBINATIONSReplies: 4Last Post: 20th August 2016, 10:22 AM -
Tall Coffee Table/Desk/BookCase/Holdall of important bits/Sofa Table
By RufflyRustic in forum WOODWORK PICSReplies: 11Last Post: 3rd December 2009, 12:14 AM -
Bosch GTS 10 table saw
By Balacv02 in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 14th October 2007, 01:51 AM