Thread: QLD Dewalt Radio Charger; First Aid Kit; Suttons Cobalt Drill Bit set

If they end up not being traded and you are willing to post at my expense i could really use those cobalt bits

Originally Posted by KahoyKutter

I'm willing to swap all 3 items for a small piece of Hard Maple/Huon Pine enough for a plane tote (130mm x 130mm x 26mm) and a front knob (75mm x 50mm x 50mm) or any other light-coloured non-pine wood. It doesn't have to be figured, or anything like that, although that'd be nice

Mike, I don't want your items but might be able to help you with some Huon Pine if you are happy to laminate and have a bit of room with your measurements. As per pictures, 3 pieces but only 115mm wide, laminated 47mm before taking off a bit to tidy the surfaces. I also can help with the 50x50 for the front knob.
If suitable you can have it for the cost of postage.

This time with pictures
20220703_120140.jpg20220703_120203.jpg

Originally Posted by Huon pine fan

Mike, I don't want your items but might be able to help you with some Huon Pine if you are happy to laminate and have a bit of room with your measurements. As per pictures, 3 pieces but only 115mm wide, laminated 47mm before taking off a bit to tidy the surfaces. I also can help with the 50x50 for the front knob.
If suitable you can have it for the cost of postage.

This time with pictures
20220703_120140.jpg20220703_120203.jpg

Thank you very much for your generous offer. I accept. I've never used HP before and I hear it is a joy.

PM incoming, HPF.


Cheers,
Mike

Originally Posted by dcarbonetti

If they end up not being traded and you are willing to post at my expense i could really use those cobalt bits

Mate, I believe in paying things forward. HPF, has done me a favour, so you have him to thank for this. If no one steps up to do the swap before the end of next Sunday, then the drill bit set are yours for the cost of a pre-paid satchel. According to my espresso scale, it's just shy of 500g.


Cheers,
Mike

Originally Posted by KahoyKutter

Mate, I believe in paying things forward. HPF, has done me a favour, so you have him to thank for this. If no one steps up to do the swap before the end of next Sunday, then the drill bit set are yours for the cost of a pre-paid satchel. According to my espresso scale, it's just shy of 500g.


Cheers,
Mike

All satchels old or new now can take up to 5kg regardless of size or printed weight, so long as it fits in the satchel and it's not over 5kg it posts.

cheers, Ian

Originally Posted by aarggh

All satchels old or new now can take up to 5kg regardless of size or printed weight, so long as it fits in the satchel and it's not over 5kg it posts.

cheers, Ian

Thanks Ian. I guess it's kinda obvious that I haven't used pre-paid satchels in a while. Back then the small one was limited to 500g. As you've just made me aware, it's now just a matter of which satchel it fits in as long as it's less than 5kg. In this particular case, I think it will fit in the smallest satchel (355 x 220mm), so whatever one of those costs. Cheers.

Ok.....seeing as no one has come forward to do a swap, the DeWalt radio charger and First Aid Kit are now free to anyone willing to pick them up from Robertson. The incomplete Suttons Cobalt Drill Set is yours, dcarbonetti. PM incoming.