Needs Pictures: 0
Results 1 to 8 of 8
Thread: Vacuum pump (no motor)
-
1st January 2022, 06:23 PM #1Senior Member
- Join Date
- Jun 2016
- Location
- Bassendean
- Age
- 70
- Posts
- 173
Vacuum pump (no motor)
Have a 3cfm 1/4 HP vacuum pump available if anyone wants it as spare parts, pump worked fine until the motor burnt out. Can send the pump for around $15 within Australia (pump only, would cost too much to send it with the dead motor). Pick up in Perth if anyone local wants it
IMG_20220101_144433073.jpgIMG_20220101_150659091.jpg
-
1st January 2022 06:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st January 2022, 11:41 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
Out of interest , what is the motor problem (did it let out some some smoke?) and/or do you know why the motor failed?
-
2nd January 2022, 11:15 AM #3
Bob, I went looking for some replacement smoke.
Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
2nd January 2022, 07:51 PM #4Senior Member
- Join Date
- Jun 2016
- Location
- Bassendean
- Age
- 70
- Posts
- 173
-
2nd January 2022, 10:01 PM #5SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 580
Could this be attached to "any old motor", (or is the pump integral to the unit) . If it can be, I'll take it.
-
3rd January 2022, 01:37 PM #6Senior Member
- Join Date
- Jun 2016
- Location
- Bassendean
- Age
- 70
- Posts
- 173
Vac Pump
Hi Russ
The motor was attached (not any more) but you may be able to fix a drive system with the old motor shaft. See attached
IMG_20220103_101323066.jpgIMG_20220103_101316017.jpg
Cheers
Dave
-
3rd January 2022, 10:45 PM #7SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 580
Thanks Dave, i need more junk...
I'll take it.
Sending pm
Russ
-
11th January 2022, 01:17 PM #8SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 580
Arrived today, thanks again.
Another addition to thejunkfuture projects pile
Similar Threads
-
Auto-cycling vacuum pump for vaccum bagging veneers and vacuum clamping.
By TimberNut in forum WOODWORK - GENERALReplies: 47Last Post: 22nd February 2021, 10:28 PM -
Is a motor start relay switch needed for a 3ph 2.8kw pump motor?
By Ben Dono in forum METALWORK FORUMReplies: 26Last Post: 14th August 2015, 02:38 PM -
Cobbling Together a Vacuum Pump For Vacuum Bagging Veneering
By RoyG in forum GENERAL & SMALL MACHINERYReplies: 6Last Post: 24th March 2015, 08:20 AM -
Vacuum Pump?
By Scott in forum WOODTURNING - GENERALReplies: 28Last Post: 10th September 2013, 08:20 PM -
Vacuum Pump - suitable for Vacuum Clamp?
By John H in forum CNC MachinesReplies: 5Last Post: 17th January 2011, 08:10 AM