Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
12th October 2021, 01:11 PM #1New Member
- Join Date
- Oct 2021
- Location
- Wisemans ferry
- Posts
- 1
Wadkin BGA150 Stroke/panel Sander (Under & Over Pad sander) - 6" wide belt, 8ft table
If you have a workshop with enough space, this is an ideal machine for sanding table tops, panels & a myriad of other sanding uses.
Machine has been stored on a veranda for approx 20 years & is offered FREE to a new home.
Machine is approx 4.0m long, 1.5m high & 1.45m wide (length of sliding table rails)
4 HP 3 Phase motor drives belt and main dust extraction fan
Sliding table is 8ft (2.4m) long
Machine fitted with sanding disk and bobbin attachments
machine weighs approx 750kg
Machine hasn't been used since was moved & has some superficial rust, accumulated dust and will require some maintenance.
Pick up only - will require ideally a flatbed truck with hiab crane or your ability to load onto tray or large trailer for removal.
Needs prompt removal due to sale of property.
Located near St Albans NSW 2775 - approx 30 mins from Wisemans Ferry
3 images of machine plus BGA150 brochure from Wadkin Archives (Archive) attached
-
12th October 2021 01:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th October 2021, 10:05 PM #2GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
I’ll take it. PM incoming.
Similar Threads
-
Looking for someone with a Wide thicknesser / drum sander / belt sander In Adelaide?
By swiftden in forum WOODWORK - GENERALReplies: 10Last Post: 3rd June 2021, 03:35 PM -
Wide belt sander / wide thicknesser in adelaide
By Lukewheels in forum WOODWORK - GENERALReplies: 9Last Post: 27th March 2021, 07:49 AM -
VICTORIA Festool Belt Sander - BS 105 E Set Wide Belt Sander
By LP Woodwork in forum WOODWORK - Tools & MachineryReplies: 16Last Post: 8th April 2020, 10:54 AM -
Stroke sander sanding belt sources
By Stewey in forum WOODWORK - GENERALReplies: 17Last Post: 12th February 2013, 12:07 AM