Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 34
Thread: Soft jaws for scroll chuck
-
17th August 2009, 07:54 PM #16
It is scrap, after all. Which is why it's so convenient... for most of us.
But if you have to go out of your way to actually find some, then you may be better off looking for alternatives. Such as rubber hose, or getting some neoprene jaws made up.
You have a Teknatool chuck, don't you Eliza?
- Andy Mc
-
17th August 2009 07:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th August 2009, 08:10 PM #17
Dave at logon (woodworking supplies) sold me a nova look alike.
I think?
-
17th August 2009, 08:31 PM #18
OK. I've some old chopping boards I've been meaning to cut up and make into a few sets of soft jaws for myself and I may as well make one or two extra sets while I'm at it. So long as your chuck will take Teknatool jaws. (I don't have a Vicmarc to use as a pattern. )
Don't hold your breath over 'em; for the last week I haven't had the time to do any turning, let alone making accessories, but it's a project I've been meaning to get around to for some time now...
- Andy Mc
-
17th August 2009, 08:52 PM #19
Not sure what the chopping board would do? But please don't bother for me, I'll get some of the cable from somewhere, I only looked quickly once, in Bunnings and I didn't ask. I'll find it, honest.
-
17th August 2009, 09:54 PM #20
You know the plastic white neoprene chopping boards?
Jaws made from those are good for touch-up work & small items such as box lids, 'cos they don't mark the wood as easily. And they can be made to whatever shape or size you want.
They don't hold larger pieces as well as metal jaws, of course, but that's not what they're for.
- Andy Mc
-
17th August 2009, 09:58 PM #21
-
17th August 2009, 11:10 PM #22
I keep missing July for some reason. It seems to go rom New Years Day straight to "X shoping days until Xmas." Where do all those in-between months go?
- Andy Mc
-
18th August 2009, 08:00 PM #23
I have some cutting board type jaws, but find they can still mark timber. They are not as soft and forgiving as the rubber, especially on softwoods like cedar.
Any rubber would do, but I find the electrical cord actually stays on the jaws while I position the piece, essential for meNeil____________________________________________Every day presents an opportunity to learn something new
-
18th August 2009, 08:19 PM #24anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
18th August 2009, 08:34 PM #25
Agreed. But they work well for holding small items, such as lids, which you've already finished and want to just "touch up."
S'pose so. I'll just be using my std. jaws as a template for the base, then gluing on extra bits to make up the thickness for the jaws. Then turning to shape. It's simple enough. Really.
- Andy Mc
-
18th August 2009, 08:43 PM #26
Is it anything like these ones?
http://www.cws.au.com/cgi/index.cgi/..._id=1107456668
For $22, they're not bad - a chopping board is nearly $10 depending on where you find 'em and this one is nice and thick...
Cheers,
Dave...but together with the coffee civility flowed back into him
Patrick O'Brian, Treason's Harbour
-
18th August 2009, 08:50 PM #27
Close enough for all intents & purposes.
For $22, they're not bad - a chopping board is nearly $10 depending on where you find 'em and this one is nice and thick...
I guess it all depends on how short your arms & deep your pockets are...
- Andy Mc
-
18th August 2009, 09:57 PM #28
Eliza
your best bet might be to ask a friendly electrician whether he (or she) has a spare 6" or 1 foot of flex or even a tad more.
then all you have to do is slice it down one side and remove the three wires - keep them as they come in handy for tying things up
PS or if there is a new house or renovation in the area check out the skip bins as there is likely to be short lengths in it.regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
18th August 2009, 10:34 PM #29
-
18th August 2009, 10:40 PM #30
would you believe I just caught on that you are talking about the white plasticy type cutting boards?
I have a wooden one, and I was stumped as to what you were going to do with it!
lol
I'm a twit.
Similar Threads
-
More chuck jaws
By BobL in forum WOODTURNING - GENERALReplies: 26Last Post: 6th March 2011, 08:33 PM -
Grinding chuck jaws
By jomac6 in forum THE HERCUS AREAReplies: 0Last Post: 15th June 2009, 11:56 PM -
PSI Jaws On Oneway Chuck
By Paul39 in forum WOODTURNING - GENERALReplies: 1Last Post: 26th April 2009, 12:54 PM -
Getting my first Chuck with jaws ??
By killerbeast in forum WOODTURNING - GENERALReplies: 24Last Post: 29th November 2007, 05:33 PM -
Soft Jaws from UHMW Plastic
By Dr_Dewey in forum WOODTURNING - GENERALReplies: 8Last Post: 21st January 2005, 02:17 PM