Results 1,126 to 1,140 of 1192
-
1st August 2019, 03:26 PM #1126
I was not online on Tuesday.
-
1st August 2019 03:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st August 2019, 09:04 PM #1127
I’m going away in a few weeks and will be away for a couple of months so I am currently clearing the decks of outstanding and promised projects. I’ve given up on finishing the SURPRISE project before I go but I have completed the SURPRISE table, a commission for dovetailed drawers, a couple of boxes and a few chair repairs. However, this has all been at the expense of THE ELEPHANT IN THE ROOM!
Thi ELEPHANT refers to a project that I should never have agreed to, not the least because I don’t really like the person I’m doing it for AND because the damage I am repairing was self inflicted! However, I do like the mate who brought him to me and so......
Basically it is the repair of a double, bowed, leadlight door tall cabinet where the owner had decided to fix a little bit of damage to one of the doors by creating a LOT of damage? The damage done to the leadlight panel by taking it out of its curved frame with a hammer and screw driver was only exceeded by the damage done by transferring it SLUNG IN A TOWEL and placed in the boot of a car to be taken to my place!
When I offered to fix it for no labour charge, the man floored me by saying “OK but do YOU know what you’re doing”......... 😡
So, fast forward to today! All of those years of making balsa model aeroplanes and then restoring real aircraft paid off with the skills necessary to make a curved former on which to repair/restore/remake the panel...
19C26981-810C-4B28-8E7F-78227647D4E6.jpeg
The ID of the curved door frame was compared to the ribs
ED70C67B-A05E-4EBB-A18C-604D8531E5B1.jpeg
and then the former was covered with 3mm plywood and top and edge battens fitted and square.....
AE20BB76-8335-466B-BA98-69F7A0B3EAD9.jpeg
The panel, on a flat piece of plywood, was then then extracted from its hiding place where I had been ignoring it......
F4A057FF-6C35-46E3-8AD1-7C6ED49B02BC.jpeg
and then very very carefully turned over and placed on the former..
E38C3555-CFAF-47E5-8C6E-1810BF0A14FA.jpeg
I was very happy to see that the panel settled on to the curved former...
D17FBAB0-838D-42F8-8272-AE75FCC4060A.jpeg
and I’m sure I heard a sigh of relief ........ or maybe that was just me?
The damage however is horrible and the balance of work forward is swinging from repair to remake?
05133DFA-CD21-4B90-98B2-0D752FB70117.jpega rock is an obsolete tool ......... until you don’t have a hammer!
-
1st August 2019, 09:44 PM #1128
-
1st August 2019, 09:49 PM #1129
This better than watching "The Repair Shop" one man does it all
Looks like a marathon session coming up.
-
2nd August 2019, 07:14 PM #1130
The leadlight repair itself is finished. I won’t bore you with all of the elements of the repair but these 2 photos show beginning and end of one section...
68460FF1-FDCD-4FF0-A8A1-D5597876DF37.jpg F30F1B0B-F0FD-403B-A884-69284DD87D93.jpeg
As often happens in both new-build and repaired leadlight panels, they grow! This one was no exception and had grown by 4mm which made it too long for the recess in the frame. While chasing out the recess in the frame with Fein and chisel, I noticed that the joint had cracked......
580AC9AE-9A6F-449C-B5D7-BDDFDAC23011.jpg
.... and further investigation showed that the gentleman who had removed the leadlight panel with hammer and screwdriver had also repaired and glued the frame with grey panelbeaters bog! He must have been confused by the dowels in the join because he left one out of each joint?
I had hoped that just finishing the leadlight panel would be JOB DONE .......
613A9C47-4BA5-43A4-B7B1-7C8356A67028.jpg
...... but JOB DONE, in this case, is going to require some good old fashioned woodwork tomorrow.a rock is an obsolete tool ......... until you don’t have a hammer!
-
2nd August 2019, 07:37 PM #1131Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,471
Lovely work. A man of many talents
-
3rd August 2019, 10:29 PM #1132
Fun with Fletty's Fein & Fung Shui
Hate rework even more so when it's my own. I have a Dragon to slay.
-
5th August 2019, 08:42 AM #1133
I managed to wrangle the panel in to the frame without causing any more damage.
7EF50AA1-9AF2-4E60-9FB9-C69B4475B999.jpeg
The panel itself has had a hard life, many of the old joints have been seriously weakened and there’s very little putty between the cames and glass, which would normally give the panel some rigidity, so I fixed it in to the frame by laying down a bead of glazing putty before clamping it in place to set. That way, the frame gives the panel a surprising amount of rigidity.
Until it was placed in its frame, I hadn’t been able to solder the inside of the new joints so I did that and ‘aged’ them with patinating fluid...
54F91ADE-0915-4E26-8631-1F64C5EDE0CB.jpeg A8E2EB1E-2B11-4F11-8CA7-EF390EDAB959.jpeg 27849270-598C-4B7E-B236-05AE7A198A11.jpeg
I’ll wait for the glazing putty to set, clean the panel, sand and re/stain the frame and fit the glazing beading but, in the meantime, it can wait near the door enjoying the sunshine...
98FCF008-2CB3-4484-84D0-B1B52BFD90EF.jpega rock is an obsolete tool ......... until you don’t have a hammer!
-
5th August 2019, 01:26 PM #1134Senior Member
- Join Date
- Jan 2011
- Location
- shep Victoria
- Age
- 97
- Posts
- 421
You have showed the customer that you know your job ,I hope that he know;s how to bow when he thank;s you ,brilliant repair.
-
9th August 2019, 04:27 PM #1135
-
16th October 2019, 07:17 AM #1136
I have returned from my trip (www.flettrek.wordpress.com) and now back to the shed. It is a GOOD feeling!
During my absence, there were some unexpected but necessary tree removals and fence rebuilding which unfortunately trashed the paving that gets me to the shed. Although busting to get IN to the shed, I started repairing the paving ......... but soon rang a local paving contractor! Inside the shed was a mess both from the burst of honouring commitments before I left and the dust that blows into colorbond sheds when there has been no rain and trees being removed.
I have visitors coming to the shed on the 30th to see our new automated dust collector set-up so I’ve got to crack on with cleaning up the shed but unfortunately the paving won’t be complete by then.
So, my priorities are;
- clean up inside and outside of the shed
- put everything back in its place
- tidy up the dust collector ducting runs and the automation wiring
- repair an antique lamp that somehow fell off the COMMITTED list
- get back on to the surprise project and make the 4 outstanding chairs
- enjoy the company of regular and irregular visitors to the shed.
It’s good to be back!a rock is an obsolete tool ......... until you don’t have a hammer!
-
31st October 2019, 09:06 PM #1137
BFCB5940-8587-40F8-B153-6C59F90CD207.jpeg
The tree has flowered........ I live for yet another year!a rock is an obsolete tool ......... until you don’t have a hammer!
-
3rd November 2019, 05:28 PM #1138
Alan you sure Helen wasn't trying to get revenge from your clean out while she was away??
By the container you sent the wood blanks up in i gather the pool took the whole bucket to clean it up?
So where is new fence and paving photos? or WiP at least?
Did you get many helping hands round to stand an applaud while you worked?
So its now the 3rd how did the interested visitors go and think of the set up?
-
3rd November 2019, 09:31 PM #1139
Alan you sure Helen wasn't trying to get revenge from your clean out while she was away??
NO COMMENT!
By the container you sent the wood blanks up in i gather the pool took the whole bucket to clean it up?
While I was away, the salt chlorinator went to heaven and the pool slowly progressed to primordial soup? It’s taken a couple of weeks, a new chlorinator and chemical warfare to fix it.
So where is new fence and paving photos? or WiP at least?
ide fence
Also while I was away, some trees were removed (a VERY long story!) and this involved destruction of a side fence and the gate to the shed. My neighbour is replacing the fence and a contractor, when he turns up, will pave a new path to the shed. The replacement gate however is finished but not one of my proudest moments?
Did you get many helping hands round to stand an applaud while you worked?
All done in secrecy
So its now the 3rd how did the interested visitors go and think of the set up
The visitors were very impressed with the DC automation. Basically, all I have to do is start any machine, the DC starts up, the appropriate blast gate/s are opened, the unnecessary gates are closed and the DC will run either the length of the machine run or continue on for a pre-set time. ALL WILL BE REVEALED SOON?a rock is an obsolete tool ......... until you don’t have a hammer!
-
6th November 2019, 09:05 AM #1140GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,427
Alan,
Great to see you are both back safe and sound
Regards
Keith
Similar Threads
-
Mrs Blackie & Fletty
By wheelinround in forum Hatches, Matches & Dispatches. Birthday greetings and other Touchie-feelie stuff.Replies: 5Last Post: 15th January 2012, 11:15 PM -
Container Of Memories Retrospective Exhibition
By thumbsucker in forum ANNOUNCEMENTSReplies: 5Last Post: 20th June 2010, 07:36 PM -
For Fletty
By wheelinround in forum WOODTURNING - GENERALReplies: 6Last Post: 28th April 2010, 08:32 AM -
Retrospective
By bdar in forum WOODTURNING - PEN TURNINGReplies: 12Last Post: 10th December 2008, 10:53 PM -
Workbench build diary (retrospective)
By oldbeamer in forum THE WORK BENCHReplies: 29Last Post: 14th May 2008, 03:59 PM