Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Flooring suggestions
-
12th April 2010, 10:26 AM #1New Member
- Join Date
- Nov 2009
- Location
- brisbane
- Posts
- 8
Flooring suggestions
I am building a small hut and am stuck with the material for the floor.
The area is prone to termites, they are eating the old hut, I have the
concrete columns set with beams and joists in place, but what to
finish the floor itself with?
It measures 3X4 metres and although it will be shelterd, and covered by a roof, I am a slow worker, it could be subject to some moisture. I have priced compressed cement but
think that is far too expensive, any cheaper suggestions? (MDF board etc). It must be termite and to some extent damp proof
thanks
Bob
-
12th April 2010 10:26 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th April 2010, 10:27 PM #2Senior Member
- Join Date
- Sep 2003
- Location
- Ipswich Queensland
- Age
- 69
- Posts
- 152
Cypress pine is termite resistant.
I think Gunnersons also supply a "termite resistant" sheet flooring. Same as yellow tongue structaflor but called termiflor. It may have be a different colour tongue.
-
13th April 2010, 09:53 AM #3
Sorry, but MDF won't do at all as it is not moisture resistant.
Box Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
27th April 2010, 09:59 AM #4Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Make sure you put ant caps on your,stumps,posts, pillaees - whatever you call them.
Pehaps Formply for the flooring? Need to seal the edges.
Similar Threads
-
Any suggestions for what can be done with....
By Stuart in forum WOODWORK - GENERALReplies: 42Last Post: 25th April 2008, 11:18 PM -
More Sorry Suggestions
By dazzler in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 264Last Post: 15th February 2008, 07:53 AM -
need some suggestions
By lubbing5cherubs in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 12th November 2007, 11:04 PM -
Need Suggestions???
By lubbing5cherubs in forum WOODTURNING - GENERALReplies: 6Last Post: 6th July 2006, 01:19 PM