Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 44
Thread: About to Join Shed Brigade
-
3rd October 2010, 03:50 PM #1GOLD MEMBER
- Join Date
- Jan 2006
- Location
- Bowral, NSW, Australia
- Age
- 74
- Posts
- 1,471
About to Join Shed Brigade
Hi,
I'm 2 days away from signing on the dotted line for a colourbond shed.
4m X 9m X 2.7m -10degrees on the roof.
The site is a sloping one so I could not get the ideal 6X whatever (double front).
It will come with insulation in the roof but I intend to put insulation in the walls later. (I have read these posts from start to finish.)
I'm having the concreting done as it will need a pump and substantial earthworks (not my forte).
Here is the chance for any comments . They are all welcome.
2 things that I need to ask about are inreasing the roof angle and maybe the height of the sides for the installation of racks etc.
Any thoughts?
Graham
-
3rd October 2010 03:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
3rd October 2010, 04:29 PM #2GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
I would have liked to have gone a little higher at the sides but was advised that over 2.7 and I would have needed a DA. Did not want to go down that path as I needed the shed up quickly.
Insulation a must. I have had one winter and one summer in the shed and felt no pain at all.
If you are going to put in windows I would suggest giving their placement a lot of thought. I went for two windows on either side for max natural light. However, I gave up quite a bit of wall that I could use now. Also, one windows gives too much sunlight from about midday - have placed insulation foam board across it now.
Also give real thought to lighting. I did a bit of reasearch then approached a lighting retailer who passed my requirements on to design engineers with one of their suppliers. I now have excellent lighting with no shadows at all. The electrician who installed the power and lighting said that they had never installed power and lighting like this in a shed before, and suggested that I wear blockout when turning all the lights on
Hope this helps in some way.Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
3rd October 2010, 05:30 PM #3
Graham you said you read the threads, being where you are, Pat's idea of floor surface for insulation come to mind nothing worse than cold aching feet and legs. Windows position for you would matter come winter and summer.
Shelves if your up my way Graham give me a buzz and see what I have.
-
3rd October 2010, 05:41 PM #4
Woohooo!!!!!!
Congratulations Graham on this new member of your family!
That's a nice shed size, you will welcome the space for sure. My shed was already here when we moved in, but there's a few things I would do if I was building one (and I may still do these if I can ever move everything out to do them!).
- Seal the concrete floor with one of those concrete paints. The surface of my slab is extremely dusty, and whenever I sweep it I need to leave the shed due to the extremely fine dust that floats around for hours. Or more expensively, cover the slab with floorboards or the sheets of yellow tongue stuff to give your feet something comfy to stand on.
- You are spot-on with the insulation. The insulation on my roof is just that silver foil stuff. It feels like it does stuff all. It would be a challenge keeping it warm down your way in winter! (I've got a nice old cast iron fireplace in my shed).
- A whirlybird would be good for me in summer (but if I had better insulation I may not need one).
- You would no doubt know this, but double powerpoints EVERYWHERE! Lights too! I had a sparky mate do mine so all I paid for was materials. But even if I had to pay full price I still would have loaded the shed with outlets.
You will love it! I'll ride down to be at the christening.
Nathan.
-
3rd October 2010, 07:45 PM #5GOLD MEMBER
- Join Date
- Jan 2006
- Location
- Bowral, NSW, Australia
- Age
- 74
- Posts
- 1,471
Thanks for the quick replies shed owners. The shed needs a DA anyway, so there will be discussion about the height of the sides.
Nathan- remember Catherine Hill. After a few beers you will be able get down there but you need to get up first.
Graham
-
4th October 2010, 07:53 AM #6SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Arundel Qld 4214
- Age
- 86
- Posts
- 701
Shed lighting
When I built my shed I put a 'clear plastic' panel in the roof over my main work bench. It stops bad sun but allows good light and I never need a light on during the day. I also but a couple of vertical panels on the southern side walls and these also allow a lot of light, with minimum heat in summer. We get frosts here and it is hot in summer but I still think it is worth it especially given the current cost of power.
Whitewood
-
4th October 2010, 08:23 AM #7
Two pieces of good news on the same weekend - Collingwood win and a new shed!
Well done Graham.
I built my shed from a kit about fifteen years ago, and it has the 2700 wall height. I find that it is plenty high enough for storage, and I can barely reach the top things anyway.
One thing to remember is that if it is a standard plan or kit, then all the engineering, the specs and the plans will be provided, so that these can be submitted as part of the DA.
If you carry out variations, you might have to submit an engineer's report to have the variations qualified and passed for approval. That usually means more expense.
One thing that my shed lacks is controlled ventilation, which makes it hot in the summers. I recommend that you look at this as part of yours, and of course it can get cold down there as well.
Good luck with it Graham. I hope you can share some pictures as it proceeds.
Kind regards
Tom.... some old things are lovely
Warm still with the life of forgotten men who made them ........................D.H. Lawrence
https://thevillagewoodworker.blogspot.com/
-
4th October 2010, 09:37 AM #8SENIOR MEMBER
- Join Date
- Jun 2004
- Location
- Sydney
- Posts
- 604
You will definately need a whirlybird. The extra ventilation helps with clearing the very fine dust as well as helping with the cooling in summer.
Ross
-
4th October 2010, 09:57 AM #9
Happy new shed
welcome to the group of those who have thir own sanity chamberregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
4th October 2010, 10:24 AM #10GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
Re the whirlybird - did I not read somewhere on the forum that these can let in moisture and that if equipment is under them you run the risk of rusting.
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
4th October 2010, 10:29 AM #11
-
4th October 2010, 10:30 AM #12SENIOR MEMBER
- Join Date
- Jun 2004
- Location
- Sydney
- Posts
- 604
-
4th October 2010, 10:45 AM #13GOLD MEMBER
- Join Date
- Jan 2006
- Location
- Bowral, NSW, Australia
- Age
- 74
- Posts
- 1,471
More replies. Thank you. But let me answer a few suggestions:
Scribbly Gum- not all share your love of Collingwood. I could say something mean but let me tell you about seeing a lane called 'Scribbly Gum Lane. No photo but can provide GPS is needed. (The sign underneath said 'Dead End')- They could have said no through road. .
Whitewood - have planned for 2 clear panels
Ross- the whirlybird for cooling in summer. Let me tell you about the 3 days of summer we get. They are the days I don't need to take the glueing inside the house to set. May think about it later if the dust is a problem.
Will see the 'man' tomorrow to discuss further details.
Graham
-
4th October 2010, 10:58 AM #14.... some old things are lovely
Warm still with the life of forgotten men who made them ........................D.H. Lawrence
https://thevillagewoodworker.blogspot.com/
-
4th October 2010, 01:36 PM #15GOLD MEMBER
- Join Date
- Jan 2006
- Location
- Bowral, NSW, Australia
- Age
- 74
- Posts
- 1,471
Apology accepted.
Graham
Similar Threads
-
Should I pre-warn the fire brigade
By springwater in forum WOODWORK - GENERALReplies: 18Last Post: 11th January 2009, 09:16 AM -
Best Way to Join These
By brucensal in forum WOODWORK - GENERALReplies: 2Last Post: 27th September 2008, 06:49 PM -
When to use what Join
By Bloubull in forum WOODWORK - GENERALReplies: 8Last Post: 8th October 2007, 12:03 AM -
how to join?
By LegacyGT in forum WOODWORK - GENERALReplies: 3Last Post: 30th October 2006, 11:56 AM -
how do I end join ply ?
By Derek Kuma in forum WOODWORK - GENERALReplies: 9Last Post: 12th May 2004, 12:01 AM