Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: My shed extensions
-
19th September 2010, 01:57 PM #1Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
My shed extensions
I am slowly getting some shed extensions done, the extension will add another 18m X ~8m onto the existing shed... I hope to eventually close all this portion in and concrete the floor, but that is a long time goal at this point, I have to get the roof finished first...
I started several years ago making the trusses which are my own design and were originally for a stand alone shed, which then I decided to just extend the current shed.
The trusses are 8m long and made out of 2" pipe with 3/4" pipe for the support bars (or whatever they are called). The support bars were supposed to be 1/2" pipe but an planning stuff up made them 3/4.. The trusses should be of very very ample strength. The gable is 10 degrees.
Pictures are as follows and are clickable thumbs.
First and second are the trusses. third picture is the bit that gets welded onto the existing shed leg to bolt the truss onto... I have not yet made the leg for the other end.. it will be made out of 3" pipe..
-
19th September 2010 01:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th September 2010, 02:20 PM #2SENIOR MEMBER
- Join Date
- Mar 2010
- Location
- Nth Qld
- Posts
- 715
Should be a worthy shed extension..... I'm jealous. You going to post this in the "shed" forum and make em cry?.
-
19th September 2010, 03:29 PM #3
What at 18x8m extension!?!
My 3x5m shed envies you.My blog: ~ for the love of wood ~ - http://theloveofwood.blogspot.com/
-
19th September 2010, 05:46 PM #4
how did you get on getting the trusses passed, I want to extend my car shed and join it on to my carport but the local council reckons they have to be tested before I can put them up, the local steel merchant wants $250 per truss to build them, I can do it for around $90, nice extension by the way, I'm jealous
G'day I'm Dave!
-
19th September 2010, 05:52 PM #5Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
I have a licence...
-
19th September 2010, 06:40 PM #6Distracted Member
- Join Date
- May 2010
- Location
- Lower Lakes SA
- Age
- 58
- Posts
- 2,557
-
19th September 2010, 06:57 PM #7Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
My licence is a drivers licence but it says open which I assume means I can do anything
AFAIK there are no restrictions on what you build where I am as far as anything other then a house goes... In any case they would not care I am not in a town...
I just realised there was a shed forum.. I might ask a mod to move it there...
Images directly displayed via the IMG tags here are restricted to 800X600 in size... In my opinion that is too small..
-
19th September 2010, 07:54 PM #8Senior Member
- Join Date
- Apr 2010
- Location
- Rural Victoria
- Posts
- 359
Sounds like you need a structural engineer to do all the calculations on the design.
Our new block is getting another shed which will be 18 x 9 m. I included this in the permit for the house and it is basically my own design, but does resemble the shed I bought as a kit back in 2002 when things weren't as exxy. The kit back then was around $7000 and eight years later it has increased to nearly triple that.
Yes the price of steel has increased but that much of an increase is incredible.
My own design is from heavier RHS, has heavier connecting plates and uses high tensile bolts throughout. I drew it up in Autocad and had the calculations done and the council granted the permit. Probably cost me about half of the kit price.
Some of these shed companies make a lot of money out of people's ignorance- on current prices for the same shed they are making $10000 for cutting a few lengths of RHS, welding a few plates to the ends, and ordering the correct number of roof and wall sheets and tophat purlins. Of course this is a little bit more work for me but I don't have to buy the materials all at once and can do things at my own pace.
You can do it yourself and save a packet. It would be worthwhile talking to an engineer- it only cost me $500 for the calculations for a shed this size. And I can use the same design again for shed no.3, and even sell the design myself, or even sell a whole shed kit.
However shed no.3 might receive some opposition from the Minister for War and negotiations have already started . Councils can be easier to deal with.....
-
19th September 2010, 08:10 PM #9GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
-
19th September 2010, 09:15 PM #10Senior Member
- Join Date
- Apr 2010
- Location
- Rural Victoria
- Posts
- 359
Ha! Ha! Ha! Good point Stuart!
Similar Threads
-
MFT-3 and extensions
By ian in forum FESTOOL FORUMReplies: 1Last Post: 28th August 2008, 08:48 AM