Thread: Sunday 30/05/2010 2pm

and 1.5 hours later you are fiddling with a computer?

I sincerely hope the 'puter is in, and being powered by, the shed!

Cheers,
Andrew

Nup, I stopped for a late lunch & a coffee, about to go back & sort out a few minor details.
One fan & one light not working & one light that is on a fan switch.

Cliff

You know the rules, without a pic this post is worthless.

Ross (whose shed is still running on a long extention lead)

Congrats Cliff!

Camping out in the shed tonight? I can see it now, making shavings 'till dawn, camp stretcher, heater, telly! (!The beer fridge now has a home!)

(Well I know this is what I'd be doing)

Pic will come soon, when the shed is tidier.

Sorted out the the switch problems, mostly labeling problems but I had to swap the switch wires between one of the fans & the High Bay light near it.... again, a labeling problem.

I have light & lots of it... I turned them all on at once & promptly popped the 10amp lighting breaker.
I now have a 20amp lighting breaker.

Not camping in the shed... yet.

I now have extension cords running out to the tractor shed & the timber container.
The beer fridge & coffee/tea (breakfast) cabinet are still stored in another container, they will be out & installed before next weekend.

About time - have you taken the bandsaw off the pallet yet?

Nope.

The warranty has run out & it is still in the crate.

I also have Rocker's table saw on a pallet with plastic wrap around it & 2 sanding machines still in there original boxes never been opened as well.

It can all happen now.

These things take time Cliff.
Highbays How big is this shed?

Cliff,

Moving into the 20th century are we.

Originally Posted by NCArcher

These things take time Cliff.
Highbays How big is this shed?

It is a 6M x 9M & about 4M high in the middle.

I will have 2 high bays about 1/3 in from each end & I will have my lathe under one of them & probley my saw bench under the other.

As well as the high bays at those points, I also have 2 side spots mounted about 2.2M (just over 7' old money) one from each side of the shed pointed in to fill in any shadows from the high bay.

Originally Posted by Cliff Rogers

Nope.

The warranty has run out & it is still in the crate.

I also have Rocker's table saw on a pallet with plastic wrap around it & 2 sanding machines still in there original boxes never been opened as well.

It can all happen now.

Geez Cliff, that bandsaw was in your shed when I dropped in ..........quite a few years ago now

Not one photo Cliff now the powers on we should see something at least to prove it

I am taking next week off so this week is very busy, I'll get to it.

Originally Posted by Wood Borer

Geez Cliff, that bandsaw was in your shed when I dropped in ..........quite a few years ago now

I found the post where I showed it arriving in the shed.
https://www.woodworkforums.com/f13/mo...tml#post223507
The photos were taken on the 14th of July 2005.