Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
20th May 2023, 09:16 PM #1Senior Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 108
NSW - Felder K700, FB640, RL140, Hammer A3-31 and Incra router table
All Felder / Hammer machines were built in late 2019 and delivered to me in February 2020. All have been lightly used in a hobby setting only. All are in outstanding condition. Will be offered here first for a while before I consider listing on machines4u etc.
Buyer’s will need to make their own arrangements for shipping, although I strongly recommend that Felder NSW be used for this.
Felder K 700 Sliding Table Saw- 3 Phase (3x400 V, 4.0kW, S6-40%)
K7_1_1.jpgK7_2_2.jpgK7_3_3.jpgK7_4_4.jpgK7_5_5.jpgK7_6_6.jpgK7_7_7.jpgK7_9_9.jpgK7_19_19.jpgK7_20_20.jpg
We specified a short slider with the telescopic extension to the fence to create an outstanding, small footprint, slider. It’s a fantastic machine. Includes the TCT fine sizing saw blade. I am unsure whether this can be run on single phase with a VFD.
A new machine with the same spec (a recent Felder invoice confirming this can be supplied) is $22,500. Asking $17,000.
Both sets of lightly used, never rotated, Felder dado cutters (~$2k new) can also be supplied, although this will be sold separately to the K700 and priced at $1300. Felder part number for this is: 1 ST 03.0.034 Set RB-TC adjustable dado cutter for saws 1,506.60 1,506.60 with removable flange, D=228 x 6.2-20 x 30 mm, Z4 V8 including 03.0.032 and 03.0.033
dado1.jpgdado2.jpgdado3.jpg
Full specifications of the K700 are as follows:
1 ST 425-70000 Saw unit with double trunnion for saw blade dia. 250-315 mm Cutting height max. 104 mm, saw blade tilt with handwheel 90°-45°, saw spindle dia.30mm speed 4800 rpm
1 ST 424-70019 Cutting width 800 mm with additional table long for K 700 (S)
1 ST 430-20021+1 Crosscut fence 1100 mm
1 ST 425-10000 Machine Base K 700 Min transport width 980 mm
1 ST 424-30033 Packing STANDARD 2100 x 1200 mm IPPC
1 ST 425-70030 Removable flange for dado blade
for max. D- 229 mm x b-20 mm
1 ST 423-70026+1 Circular saw fence for round bar guide
D= 50 mm with ruler with DIGITAL SCALE
READING and fine adjustment
1 ST 424-70027 Magnetic strip for cutting width 800 mm Series 700
1 ST 425-70025 Overhead saw guard (rip capacity 800 mm), hood for 90° and hood for angled cuts are height-adjustable and can be pivoted away fr the working area, saw blade diameter 315mm, Vacuum connector D-80 mm
1 ST 423-70015 Dial for saw blade angle in handwheel
1 ST 430-20057 Sliding table, Table length 1300 mm Anodised
1 ST 424-11001 Outrigger table 1100 for cutting length 1300
2050 mm, Table size 800 x 600 mm
1 ST 430-20018 Mitre indexing system for outrigger 1100
1 ST 430-20023 Telescopic extension for crosscut fence
2000 mm with mm/inch scale
1 ST 424-40604 Electrical system 3x400 V, 4.0kW, S6-40%
Direct start, CE/US
1 ST 424-40601 50 Hz motor frequency
1 ST 425-90302 Operating manual CF 741/CF 741S, English
1 ST 420-30013 Preparation for container transport
for K 700
1 ST 424-50025 Emergency Stop Button
1 UN FS fitting of up to 5 m lead with plug
Felder FB 640 Bandsaw – 3 Phase (3 x 400 V, 50 Hz , 2,2kW, 3HP, S1)
FB1.jpgFB2.jpgFB3.jpgFB4.jpgFB5.jpgFB6.jpgFB7.jpgFB8.jpgFB9.jpgFB10.jpg
An outstanding bandsaw in outstanding condition. Currently fitted with a McDiven carbide 27mm blade. Note that the motor plate suggests that this saw will happily run off single phase with a VFD, however, buyer’s will need to confirm this themselves.
A new machine with the same spec (a recent Felder invoice confirming this can be supplied) is $15,000. Asking $10,000.
1 ST 13.2.640 BANDSAW FB 640 Industrial EURO - CE 3 x 400 V, 50 Hz , 2,2kW (3HP) S1 with upper and lower precision blade guiding rack and pinion for upper blade guiding tilting saw table 0 - 20 dg., cast rip fence slot in the table for mitre fence including auto. brake cutting height 400 mm, cutting width 620 mm, indication for blade tension. Saw blade length from 4730 mm to 4800 mm Recommended saw blade length 4760 mm
1 UN FS fitting of up to 5 m lead with plug
Hammer A3-31 Planer Thicknesser with spiral head – single phase (1x230V 3kW, 4HP)
A3_1.jpgA3_2.jpgA3_3.jpgA3_4.jpgA3_5.jpgA3_6.jpgA3_7.jpgA3_8.jpgA3_9.jpgA3_10.jpg
Excellent condition. Cutters have never been rotated. Includes rolling carriage, lifting bar and digital display gauge. Also have the head (but cannot find the bit) of the optional silent power torx screwdriver which is calibrated at 5Nm for cutterblock knife changes.
A new machine with the same spec (a recent Felder invoice confirming this can be supplied) is $9,400. Asking $7,500.
1 ST 581-10001 Surface-Thicknesser planer A3-31 (platinum-grey/ruby-red)
1 ST 581-13002 Packaging A3-31
1 ST 581-60007 Silent Power Spiral cutter block 310 mm with TC reversible knives
1 ST 581-01005 Surface/thickness planing width 310 mm Surface planer table length 1400 mm (55") Thicknessing width 306 mm (12") Thicknessing height 4-225 mm (0.15"-8 3/4") Max. depth of cut 4mm (0.2") Synchronised feeder drive 6 (7.2) m/min at 50 (60) Hz Planer fence tilting 90°-45° with anodised fence plate Dual lifting jointer tables
1 ST 01.1.202 Digital Display, resolution 0.1mm, counterclockwise count in 2mm steps
1 ST 581-40003 Electrics A3-31 1x230V 3kW (4 HP) S6/40% 50 Hz with mechanical brake
1 ST 581-90102 Operating manual English
1 ST 501-13010 Preparation for container transport A 3
1 ST 503-04104 Emergency Stop Button
1 ST 503-134 Rolling carriage without lifting bar for 156.24 156.24 A3, B3 basic/winner/perform
K3 basic/winner/perform, F3 and older models
1 ST 500-149 Lifting bar for HAMMER machines 125.28 125.28 003 004 019A 231 28 44 210 211 221
1 UN FS Fitting of up to 5 m of cable to 20amp
Felder RL 140 Dust Extractor – 3 Phase (3x400 V 50 Hz 3 kW 4 HP S1)
RL_1.jpgRL_2.jpg
This one is quite self-explanatory. Excellent condition and includes antistatic filter and a 5m cable.
A new machine with the same spec (a recent Felder invoice confirming this can be supplied) is $8,138. Asking $6,000.
Incra router table with AUK 1800w router, lift and incra wonderfence
Router_1.JPGRouter_2.JPGRouter_3.JPGRouter_4.JPGRouter_5.JPGRouter_6.JPG
Purchased from professional woodworking supplies in August 2020. In excellent working order, fairly sparingly used. Note that I only use the wonderfence in the simplest of configuration. All of the parts on the router table / shelf in the photos is included, but if you're in doubt about anything, please ask. Asking $2600.
Local pickup from Beecroft, Sydney is preferred, also can consider shipping this at buyer’s expense.
Includes:
- AUK 1800w router with switch (router control station)
- Incra prorouter table (type A) with mast-r-lift (mast-r-lift II M)
- Incra router table stand (up to 900mm)
- Incra wonderfence
- Cleansweep magnalock ringset (6)
- Cleansweep downdraft dust collection
- Wheel kit (new in box, not attached)
-
20th May 2023 09:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd May 2023, 08:03 PM #2Senior Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 108
Withdrawing the dado, but everything else remains available.
-
25th May 2023, 05:21 PM #3
Hi airbag. I know it's not listed but are you selling the diamond universal saw blade and riving knife? Also not sure if you sold the dado set but I'd be keen. Cheers
Sent from my CPH2025 using Tapatalk
-
25th May 2023, 07:14 PM #4Senior Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 108
Sorry, both are accounted for with others, I accidently listed the dado when I thought it was still available.
-
26th May 2023, 02:20 AM #5
That's all good. Goodluck with the sale
Sent from my CPH2025 using Tapatalk
-
29th May 2023, 12:53 PM #6Senior Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 108
I have now posted these to gumtree and will soon post to machines4u.
Mods, please move to the external sales forum.
-
1st July 2023, 08:58 PM #7
Does the RL140 currently run on a VFD or direct three phase 415v?
-
7th July 2023, 02:26 PM #8Senior Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 108
It's three phase 415.
-
11th July 2023, 06:40 PM #9Senior Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 108
All sold.
Similar Threads
-
SOLD: Router Table - Triton Router, Incra MagnaLock, Incra 430mm LS Full Metric Sysytem
By Stirlo55 in forum WOODWORK - Tools & MachineryReplies: 10Last Post: 25th November 2023, 04:00 PM -
VICTORIA Router Table, Incra Wonderfence metric, Triton TRA001 Router
By Smarty90 in forum WOODWORK - Tools & MachineryReplies: 4Last Post: 8th September 2020, 11:00 AM -
Incra Wonder Fence, Festool router table, Table saw GUMTREE SA
By rev in forum FOR SALE on eBay and external sites.Replies: 5Last Post: 7th February 2018, 09:36 PM -
felder and hammer table saws- worth it?
By TimberNut in forum TABLE SAWS & COMBINATIONSReplies: 31Last Post: 23rd July 2007, 03:04 PM -
Incra Router Table
By sbnx in forum INCRA JIGSReplies: 2Last Post: 15th April 2007, 10:25 AM