Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
1st August 2021, 01:12 AM #1
SCM S50 Thicknesser with true Spiral head.
Rebuilt machine. 3Phase with plug. 7.5HP
Capacity 500mm wide. 235mm height.
True spiral head. 144 tungsten insert finishing cutters. 15 x 15 x 2.5 radiuses cutting edge. 4 edges per insert.
The table has been precision surface ground to flat.
New bearings throughout including the motor.
Advertised elsewhere.
Packing and shipping can be arranged at buyers cost.
$5500.There ain't no devil, it's just god when he's drunk!!
Tom Waits
-
1st August 2021 01:12 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st August 2021, 08:24 AM #2GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
I’d take it if it was a different colour
-
2nd August 2021, 06:32 PM #3GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,559
Five minutes with the spray gun Peter and it would be as pink as you want it. Unkillable.
-
3rd August 2021, 01:18 PM #4
Nothing wrong with CAT Yellow.
There ain't no devil, it's just god when he's drunk!!
Tom Waits
-
3rd August 2021, 03:00 PM #5SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 660
I am very tempted by this. I don't have 3 phase, but I can run that sort of current with a VFD. My main concern is weight and size. I was very close to buying a Laguna 16" which would actually cost more. Hmmmm.
-
3rd August 2021, 08:04 PM #6GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
-
3rd August 2021, 08:20 PM #7SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 660
-
3rd August 2021, 08:50 PM #8
It runs fine on the 20A 3 phase I have had recently installed in my space. It is also priced cheaper here than in other places it is advertised. The head alone is close to $5K. 120mm diameter.
For clarity I am selling this to help finance a 630 wide new machine. I also have a 400 wide combo with a segmented head that I will also be moving on post new machine purchase.
talk to me.
cheers
BThere ain't no devil, it's just god when he's drunk!!
Tom Waits
-
3rd August 2021, 09:05 PM #9SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 660
You are just over the bridge from me Enfield Guy, so I might come take a look next week if its still available. I am guessing that machine is well above the 500kg mark, and that's my biggest concern.
-
4th August 2021, 08:22 AM #10
You would be correct about the weight range. You will need to make an appointment to view. That can be arranged for any day including the weekend.
I’ll send a message with my details.There ain't no devil, it's just god when he's drunk!!
Tom Waits
Similar Threads
-
VICTORIA VIC Carbatec spiral head thicknesser
By Lee roy in forum WOODWORK - Tools & MachineryReplies: 5Last Post: 3rd September 2021, 12:33 PM -
Fit spiral cutter head to Jet 13" thicknesser
By stocktrans in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 2Last Post: 5th February 2019, 05:40 PM -
Thicknesser Troubles - Spiral head
By Damienol in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 38Last Post: 5th October 2015, 02:54 PM -
Spiral head thicknesser
By hereward in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 28Last Post: 6th September 2010, 01:24 PM