Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 16
  1. #1
    Join Date
    Dec 2011
    Location
    Jacksonville
    Posts
    2

    Default How can I make a photo into a pattern

    I'm new to pyrography and I'd like to try to make a pattern from a photo. What is the best way to do this? Any help will be appreciated. Thanks

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Sep 2011
    Location
    kallangur qld
    Posts
    1,074

    Default

    If you can scan on a computer . then edit to black & white It may work, for you.

    Jeff

  4. #3
    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    2,636

    Default

    I'd probably scan and convert to vector format with something like Adobe Illustrator.
    -Scott

  5. #4
    Join Date
    Dec 2011
    Location
    Jacksonville
    Posts
    2

    Default

    Thanks, I'll give that a try

  6. #5
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    3,260

  7. #6
    Join Date
    Aug 2008
    Location
    Normanhurst NSW 2076
    Age
    81
    Posts
    484

    Default

    Hello Lilcee,
    One el cheapo way is to photo copy and blow up to say A4 size then trace onto wood using transfer paper (not carbon - it is a problem with removing marks). Transfer paper is reusable and easily bought from your local art store. I have found this to be very effective when traced onto 3 ply. If you go to Sue Walters website you will see many tips and suggestions. Hope this helps, John M.

  8. #7
    Join Date
    Jul 2003
    Location
    Brisbane
    Age
    69
    Posts
    15

    Default

    Hello guys,
    if you can scan and convert the photo to black and white, print it out.
    This method will invert the photo.
    Turn the print onto the timber face down. Then wipe - rub the back with with thinners. The picture will transfer onto the timber.
    I've done this with a photo of my daughter onto a signature key for her 21'st.
    I did convert it to b & w with photoshop. Hope this helps.

  9. #8
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    4,650

    Default

    Thinners can be somewhat messy, and the liquid may warp the paper. For laser prints and photocopies, face down (of course), I run over the back with a clothes iron at its highest setting (usually Linen). For fixed registration, attach with staples beyond the working area.

    Best to do this while SWMBO is not at home.

    Cheers,
    Joe
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  10. #9
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    If you haven't found it already, another resource to look through is the

    Pyrography & Woodburning Forum at www.woodcarvingillustrated.com

    I'm told that I can start a forest fire with a cigarette butt.
    Why can't I get the wood stove going with a blowtorch?

  11. #10
    Join Date
    Sep 2011
    Location
    kallangur qld
    Posts
    1,074

    Default

    Robson,

    your timber is wet , or the torch is out of gas.

    Jeff

  12. #11
    Join Date
    Sep 2012
    Location
    Ex Nr Carcassonne S France Now NW Wiltshire, Blighty.
    Posts
    497

    Default

    The way that I have always done it is to print your photo/pattern to the size that you want to pyro and fix it onto the wood with a couple of small bits of bluetak. Then use black carbon paper and preferably a 0.5mm click pencil to transfere it to the wood. If you use blue then there are bound to be a few places where you don't completely cover the carbon line and it will show very clearly. With black it doesn't.

    Don't transfere the complete picture, just the important parts like the outline and important inner lines, eyes, nose, etc. Then you don't have a confusing picture in fromnt of you to start. From there you use the picture as a guide to build it up from there.

    I am definately no artist and it fascinates me just to see it build..
    My ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
    http://johnamandiers.wixsite.com/johns-w-o-w-1

  13. #12
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    If the photo is the size of the carving that I want to work on:

    Stick the picture to a sunny window. Front or back, you can still see it.
    Blank paper on top and trace what I need.
    One advantage is that I can slide my new drawing around to change proportions.
    Or, combine two or more pictures to get something absolutely unique.

    I've been going away from using carbon paper = too greasy and hard to get mistakes off the wood.
    Instead, I turn my working drawing over and scribble all over it with an artist's 4B graphite stick.
    Those are about 6mm x 12mm x 50mm. Tracing the drawing transfers the graphite.
    Be careful from this point on as the graphite is not very well bonded to the wood at all.

  14. #13
    Join Date
    Sep 2011
    Location
    kallangur qld
    Posts
    1,074

    Default

    I use Graphite paper from the art supplies, rubs off with a normal pencil rubber, and with pic"s , i run them through Kodak program and convert to sepia, I find this works.

    Jeff
    vk4

  15. #14
    Join Date
    Jun 2007
    Location
    Orange NSW
    Posts
    264

    Default

    I would just like to say thanks for all the advice that has come though on this subject. I have used the method of using a black & white pics and tracing using graphite paper It worked for me but it is good to have confirmation on what i am doing

    John

  16. #15
    Join Date
    Mar 2011
    Location
    Bungendore
    Posts
    59

    Default Pyrography tips

    A few tips from an experienced pyrographer to avoid lengthy experimentation:

    Do not use carbon paper to transfer. It is an ink and will stain timber. The best pyrographers use graphite paper to transfer images and remove any graphite lines by sanding or erasing.

    The thinners method of transfer can be risky as you are combining a flammable liquid with a hot burner. The smell of the thinners can be awful, too. Image must be in reverse and only works with pigment based(powder) printers (photocopiers) and will not work with water based inkjet printers.

    Plywood is not a good surface for pyrography. I tried to confirm the timber used for the best plywood(even marine plywood) and couldn't get a satisfactory answer. Tasmanian oak is about the best and readily available timber other than sourcing better quality timbers. Remember, the quality of the timber reflects the quality of the pyrography.

    Sometimes, to get a good image from a book or photo on to the computer, is to photograph it and digitally transfer it onto an editing program. Scanning can reduce quality. Once on the computer, change image into grayscale and print without colour management.

    If there is any other advice I can offer, please feel free to email me at [email protected] but I will try and keep an eye out on the forum as well.

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 12
    Last Post: 29th October 2011, 04:44 PM
  2. Tea bag box pattern
    By diana in forum BOX MAKING
    Replies: 1
    Last Post: 22nd July 2008, 07:48 PM
  3. 3D printing to make pattern?
    By neksmerj in forum METALWORK FORUM
    Replies: 2
    Last Post: 25th June 2008, 08:44 PM
  4. Replies: 8
    Last Post: 23rd April 2007, 12:04 AM
  5. Looking for pattern
    By ptscroller in forum SCROLLERS FORUM
    Replies: 0
    Last Post: 25th January 2006, 01:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •