Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: Striving tool
-
25th August 2022, 04:30 PM #1GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,222
Striving tool
Looking for a skiving tool for my wife.
Saw these on google and wondering on opinions.
I am getting a hand held one too.
Thanks
Lyle
-
25th August 2022 04:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th August 2022, 04:55 PM #2
That looks like a fun metalworker's project!
-
25th August 2022, 08:41 PM #3GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,222
Too much for me.
Just wondering if it is a good tool or not.
Better than a hand skriver?
-
25th August 2022, 10:53 PM #4China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
I have never seen one just like that, looks like a good economy version of the high end units (8 times the price ) I would give it a go.
Would be better than a hand skiver more precise for less effort , you could use it as splitter as well, hand skiver still have a place as there are times when you just can't put the project in the machine.
-
26th August 2022, 01:39 AM #5China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Have look here seem to perform quite well
Leather Splitter Review - YouTube
-
27th August 2022, 07:45 PM #6GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,222
Thanks china. I've ordered one. Those videos seem like it will be OK for my use. I'll get some spare blades too. Although I reckon I can sharpen them if needed.
-
3rd September 2022, 10:03 AM #7GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,222
The skriver arrived very promptly. Good packaging.
Construction as described, stainless steel. I was surprised that they bolted the base instead of welding.
But I'm very pleased with the construction. I can see this tool lasting a long time.
I have never used a skriver before, hand held or machine type. So from that perspective my opinion was very high.
The ease of use and adjustment is excellent. Some before and after shots of some experimental pieces attached. Cut surface finish to my eyes is good. As with all tools, sharp blades are a must have. So I'll source some spares ASAP.
The cut width is about 100mm. But that might take some effort depending on depth of cut.
So far an excellent ebay tool buy.
Lyle
-
29th November 2022, 09:15 PM #8GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Hi Lyle.
I’ve wondered about these. They seem to be more for splitting then form skiving. Can you do a narrow edge bevel on them. Say you wanted to put a bevel 10mm wide on an edge - say on 2mm thick leather that you want to finish at 1mm thick. Can you do that?
Anyway, how useful are you finding it now, a couple of months later?
Cheers
ArronApologies for unnoticed autocomplete errors.
-
30th November 2022, 06:42 PM #9GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,222
Hi Aaron. Not sure of what you want it to do.
I'm thinking you might be better with a hand held skiver.
Lyle
-
30th November 2022, 07:07 PM #10GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Just a beveled edge - thin the edge before joining.
41613D3C-954C-4BC3-8226-47ACFFF4E61F.jpegApologies for unnoticed autocomplete errors.
-
30th November 2022, 08:57 PM #11GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,222
No I don't think it could do that.
That's why I think a different tool would.
Lyle
-
1st December 2022, 11:15 AM #12
-
1st December 2022, 01:07 PM #13GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Probably this does, I haven’t talked to anyone who’s used one though so not sure. You would need to be able to tilt the blade.
Leather Craft Edge Skiving Machine Leather Splitter Skiver - Etsy AustraliaApologies for unnoticed autocomplete errors.
-
2nd December 2022, 11:43 AM #14
Half the price and with a demo video. They probably buy it here then onsell.
https://www.aliexpress.us/item/10050...d=z46XMN2WG7ds
This probably would not work for softer leathers. A drum skiver would be better there but they are not cheap.
-
2nd December 2022, 11:53 AM #15GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
I’ve always imagined that with those skivers where the user pulls the leather through then you would end up with annoying stretched edges. However the electric ones are expensive and much more then needed for my occasional use.
Apologies for unnoticed autocomplete errors.
Similar Threads
-
1820s Tool Chest and early NZ colonial period tool collection
By kiwioutdoors in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 16Last Post: 30th September 2020, 01:59 PM -
Hercus 260 quick change tool post and tool size
By MWF FEED in forum THE HERCUS AREAReplies: 0Last Post: 27th September 2020, 02:50 PM -
N.S.W. Axminster Evolution Lathe Tool posts and Tool rests
By Ruddy in forum WOODWORK - Tools & MachineryReplies: 5Last Post: 11th September 2020, 04:00 PM -
NOT A WOODWORKING TOOL BUT A HAND TOOL -A KNIFE SHARPENING STEEL
By Lyle in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 6Last Post: 16th May 2014, 12:45 PM -
Parting tool mounted on rear tool post advice needed
By colbra in forum METALWORK FORUMReplies: 17Last Post: 12th February 2012, 02:49 PM