Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Anvil on e Bay
-
26th January 2013, 12:44 PM #1
Anvil on e Bay
I had a look at this anvil on e Bay .
It's up to $406 but how rough is it for that price ?
eBay Australia: Buy new & used fashion, electronics & home d
Can one this far gone be brought back to life ?
Rob
-
26th January 2013 12:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th January 2013, 02:22 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
-
27th January 2013, 12:33 AM #3
It is finished now.....but the piece of face missing to the heel would be my biggest concern, any edges can be built up with weld, but it is a big job, the whole lot needs to be pre-heated. Not impossible but costly when you start looking at the price of hard facing rods.
1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
27th January 2013, 02:10 PM #4
Pre heat an anvil Ewan, now that would be a sight .
what would standarg mig wire be like at building it up ? It sets to hard to file just cooling in the air.
It sold for $695, I suppose it is a reasonably big one at 755 long x 160 wide.
Rob
-
27th January 2013, 02:39 PM #5.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
Mine is 112 lbs and is 585 long x 85 wide so I guess that one would be maybe a 256 lber.
A while back I saw somewhere that $3-$4 a lb was a fair price for an anvil in fair or better condition.
So in terms of price/weight that was probably about right but I would say that anvil was some way from "in fair" condition.
-
27th January 2013, 06:29 PM #6
Sure is, i have had my 70lbs glowing......took a few hours but once hot there is no need to take another heat. The hardest part is handleing something so big and so hot.....(I didn't weld mine, i just dressed it)
I'm not completely up with hard facing, but i think you will find the mig weld would be too soft still, at the other end of the scale, the standard hard facing rods you get for excavator teeth are too hard, the face will crack up with use. I know this cause i have a few hammers i have hard faced with those type of rods......I
I think the price is ridiculous for the state of it, should have been sold as a ASO.....1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
28th January 2013, 10:34 PM #7GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
Looks seriously abused, Wallaby Ted - brother of Roo. Its a boat anchor.
With the bits breaking off the edge there is a good chance the whole hard face may come off, either all at once or more likely as a series of bits & nearly impossible to fix, short of making a new anvil out of weld. The whole face looks to have been used as a backer for drilling or the whole thing has been burried in a dung heap for a few decades - either is possible. Major work there.
Building up the deficencies is really a job for a specialist welding shop that does mining machinery & the like, and they would know how to charge.
Similar Threads
-
I bought a Anvil
By bwal74 in forum METALWORK FORUMReplies: 17Last Post: 9th May 2012, 10:56 AM -
Anvil-vise anyone seen one?
By Ueee in forum METALWORK FORUMReplies: 37Last Post: 14th April 2012, 11:42 PM -
repairing an anvil
By kraits in forum METALWORK FORUMReplies: 5Last Post: 30th June 2011, 11:06 PM